Beckhoff EK1322 | 2-port EtherCAT P junction with feed-in

EK1322 | 2-port EtherCAT P junction with feed-in

The EK1322 2-port EtherCAT P junction can be used in an EtherCAT Terminal segment at any desired position between the EtherCAT Terminals and enables configuration of EtherCAT P star topologies.

A modular EtherCAT P star hub can be realized by using several EK1322 units in a station.

Special features:

connection technology: 2 x P-coded M8 sockets

can be used for configuring an EtherCAT P star topology

The front terminal points are used for the system and sensor supply US and the peripheral voltage for actuators UP for the EtherCAT P outputs.

A connection to individual EtherCAT P devices or even complete EtherCAT P segments can be established via the P-coded M8 sockets, which enable the connection of an EtherCAT P cable with M8 connector.

EK1322

Technical data    EK1322

Task within EtherCAT system    coupling of EtherCAT P junctions

Data transfer medium    EtherCAT P cable, shielded, to 100BASE-TX EtherCAT P networks

Bus interface    2 x M8 socket, P-coded, shielded

Power supply    external feed-in: 24 V DC (-15 %/+20 %) for US and UP

Sum current    max. 3 A per US and UP for all EtherCAT P ports in total

Current consumption from US    typ. 3 mA

Current consumption from UP    typ. 3 mA

Current consumption E-bus    200 mA

Operating temperature    -25…+55°C

Storage temperature    -40…+85°C

Vibration/shock resistance    conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission    conforms to EN 61000-6-2/EN 61000-6-4

Protect. rating/installation pos.    IP20/variable

Approvals/markings    CE, UL

Technical data

Housing data

To top

Housing data    EK-24-PWR

Design form    compact terminal housing with signal LEDs

Material    polycarbonate

Installation    on 35 mm DIN rail, conforming to EN 60715 with lock

Side by side mounting by means of    double slot and key connection

Marking    –

Wiring    depending on module

Connection cross-section    s*: 0.2…1.5 mm²,

st*: 0.2…1.5 mm²,

f*: 0.25…0.75 mm²

Connection cross-section AWG    s*: AWG28…14.

st*: AWG28…14.

f*: AWG28…14

Stripping length    8…9 mm

Dimensions (W x H x D)    24 mm x 100 mm x 52 mm without connector