Beckhoff FC5322 | CAN FD card, 2 channels, PCIe® x1
FC5322 | CAN FD card, 2 channels, PCIe® x1
The FC532x PC plug-in cards connect the PC (PCI Express®) to a CAN FD network. CAN FD is a further development of the very common CAN hardware.
The advantage of CAN FD is that up to 64 bytes of data can be sent and received in one CAN frame by operating the data range with a higher baud rate.
The option is also available to operate the FC532x CAN FD cards in the classic CAN mode of the FC512x CANopen card.
The CAN FD functionality can be operated via the CAN interface and enables layer-2 access.
If the card is operated as a CANopen master/slave, only the classic CAN mode can be used.
| HIMA | F3 AIO 8/4 01 |
| HIMA | F3 D10 20/8 02 |
| HIMA | F3 DIO 8/8 01 |
| HIMA | F3231 |
| HIMA | F3236 |
| HIMA | F3236 984323602 |
| HIMA | F3237 984323702 |
| HIMA | F3322 |
| HIMA | F3330 |
| HIMA | F3330 984333002 |
| HIMA | F3331 |
| HIMA | F35 |
| HIMA | F3DIO20/802 982200442 |
| HIMA | F60DIO24/1601 |
| HIMA | F60DO801 |
| HIMA | F6214 |
| HIMA | F6215 |
Technical data FC5322
Fieldbus CANopen master/slave interface (classic CAN), CAN FD
PC interface PCI Express® x1
Number of channels 2
Data transfer rates max. 5…8 Mbit/s in data phase, max. 1 Mbit/s in arbitration phase
Bus interface 2 x D-sub plug, 9-pin
Termination resistor switchable
Bit width in the process image total max.: 4 kbyte input and output data
Hardware diagnostics 2 LEDs per channel
Driver TwinCAT 3.1
Dimensions (W x H x D) single slot, approx. 100 mm x 130 mm
Operating temperature 0…55°C