Shinkawa VM-721B 18-CHANNEL RELAY MODULE
Shinkawa VM-721B 18-CHANNEL RELAY MODULE
UTPUT
Indicators : ACTIVE LED (Green)
On : Normal
Flash : The module is installed in slots other
than Slot 11
Contact output : Number of outputs : 18 points(logic changeable)
Contact type : Dry contact (SPST)
Select for N.O. / N.C. contact by internal jumper.
Enagization method: Normally de-energized or
Normally energized field
changeable
Contact capacity : 250VAC / 5A, 30VDC / 5A
ENVIRONMENTAL CONDITION
Operating temperature : 0 to +65°C
Operating temperature at explosion proof construction
: 0 to +60°C
Storage temperature : -30 to +85°C
Relative humidity : 20 to 95%RH (non-condensing)
POWER CONSUMPTION
Module : Less than 15W
MATERIAL AND FINISH
Face plate : ABS (Black)
Sheet : Polyester tough top (Gray)
Base plate : Alminium alloy (Silver)
MASS
| ABB | 3BHE024855R0101 |
| ABB | REF601CE446BB1NH 24-240V 50/60Hz |
| ABB | UFC765AE102 3BHE00364R0102 |
| bently | 3500/60 |
| PROCONTROL P | GJR2395500R1210 83SR50 |
| PROCONTROL P | 5102-MCM4-DFCM4 |
| ABB | 81943A059-1 |
| ABB | 81943A059-2 |
| ABB | A419471 |
| ABB | AINT-14C |
| bently | 3500/92-02-01-01 |
| bently | 3500/32-01-01 |
| bently | 3500/33-01-01 |
| bently | 3500/25-01-01-00 |
| bently | 3500/40M-01-01 |
| bently | 3500/22M-01-02-01 |
| Meggitt | CA202 – 144-202-000-203 |
| Meggitt | TQ402 – 111-402-000-012 |
| bently | 3500/92-02-01-01 |
| bently | 3500/32-01-01 |
Body : Max. 1.0kg (2.2lb)
ACCESSORY SPECIFICATION CODE / IDENTIFIED BY TB□
Code Accessory Quantity
(Part Code)
/TB1 18 channel relay module output terminal block plug (18pin)
FRONT-MC-1.5/18-STF-3.81 (PHOENIX CONTACT)
2pieces *1
(7072NAA)
/TB2 18 channel relay module output terminal block plug (18pin)
FRONT-MC-1.5/18-STF-3.81 (PHOENIX CONTACT)
2pieces *1
(7072NAA)
Note)*1 When individually ordering specify the parts code,it is require to arrange
for a necessary amount.
OTHERS
Note) The relay module is possible to install only one module in a rack.
The module should be install to slot. 11.
VM-772B Device Config is necessary to program the logic of output
contact.
CONTACT OUTPUT
Contact (RELAY1) : Slot 1 DANGER
Contact (RELAY2) : Slot 1 ALERT
Contact (RELAY3) : Slot 2 DANGER
Contact (RELAY4) : Slot 2 ALERT
Contact (RELAY5) : Slot 3 DANGER
Contact (RELAY6) : Slot 3 ALERT
Contact (RELAY7) : Slot 4 DANGER
Contact (RELAY8) : Slot 4 ALERT
Contact (RELAY9) : Slot 5 DANGER
Contact (RELAY10) : Slot 5 ALERT
Contact (RELAY11) : Slot 6 DANGER
Contact (RELAY12) : Slot 6 ALERT
Contact (RELAY13) : Slot 7 DANGER
Contact (RELAY14) : Slot 7 ALERT
Contact (RELAY15) : Slot 8 DANGER
Contact (RELAY16) : Slot 8 ALERT
Contact (RELAY17) : Slot 9 DANGER
Contact (RELAY18) : Slot 9 ALERT
CONTACT OUTPUT
Enagization method : Normally de-energized
Contact Type : N.O. (Normally Open) Contact
OTHERS
Contact type Enagization method Power OFF
Power ON
Normal state Alarm state
N.O. contact
NORMALLY DE-ENERGIZED OPEN OPEN CLOSE
NORMALLY ENERGIZED OPEN CLOSE OPEN
N.C. contact
NORMALLY DE-ENERGIZED CLOSE CLOSE OPEN
NORMALLY ENERGIZED CLOSE OPEN CLOSE
Alarm Contact Operation
Default Value
Specification
Model Code / Additional Spec. Code ( ) No entry if additional
spec, code is not specified.
V