EATON VICKERS EEA-PAM-523-A-32 02-326001 POWER AMPLIFIER

Performing a Manual UPS Battery Test

You can use the ConnectUPS Web/SNMP Card to manually perform a

UPS battery test. The ability to test the UPS is model dependent

(consult your UPS documentation for more information).

1. To manually start a battery test on a specific UPS, select Control

from the menu at the top of the home page.

2. Become the Superuser.

3. Select Initiate Battery Test, followed by Set Values to start the

process.

Viewing the UPS History Logs

Select UPS History from the menu at the top of the home page to choose

the current UPS Data Log and UPS Event Log:

The data log provides numerical data logged once a minute from the

UPS.

The event log contains text messages regarding the status of the

UPS and the ConnectUPS Web/SNMP Card.

Past data and event logs are also accessible, as well as a data log applet

that displays the data in a graphical format

UPS Management from an SNMP NMS

To access the ConnectUPS Web/SNMP Card via SNMP:

1. Use these Community strings:

GET Community string:  public

SET Community string:  private

By default, the ConnectUPS Web/SNMP Card’s Write Access

Managers table is configured for read-only SNMP access to any

NMS with a public community string. An NMS with a private

community string has read/write SNMP access

Viewing UPS Monitoring Parameters

The ConnectUPS Web/SNMP Card supports several MIB groups that

separate specific UPS parameters into related areas. The groups used in

the MIB for the card include:

Ident

Battery

Input

Output

Config

Control

Test

Alarms

Bypass

Traps

Forcing the UPS to Shut Down

The ConnectUPS Web/SNMP Card supports MIB groups containing

objects that enable the user to shut down and restart the UPS.

Receiving Event Traps

The ConnectUPS Web/SNMP Card supports several event-related traps

that can be reported to the SNMP network management software.

Refer to the MIB files found on the supplied CD-ROM for more

information.