EATON CORPORATION EDB3225L CIRCUIT BREAKER
Forcing the UPS to Shut Down
1. Select Configuration from the menu at the top of the home page,
then UPS Event Actions.
2. Log in as the Superuser.
3. Select UPS Shutdown and Restart Settings.
4. Verify Load Segment to Turn Off following OS Shutdown is set to YES.
5. Set the appropriate Delay Before Segment Turns Off following the start
of the Client’s OS Shutdown in seconds to ensure that any NetWatch
clients and their respective operating systems have enough time to
complete their shutdown. The default is 180 seconds, but you may
wish to increase or decrease this value as appropriate for your
system.
Bodet Micro Quartz Delta II
B&R Power Supply PS477 3PS477.9 Rev.C0
Siemens C7-633 A5E00060957 C79039-A8000-Z032-02-SA for 6ES7633-1DF02-0AE3
DANFOSS FC-302PK75T5E20H1 131U4964
Wittenstein Alpha CP060-M02-20-111-000
LENZE E82EV152_2C000 13142269 version:4A37 WITH module E82ZAFSC
Mitsubishi FR-A540-3.7K-EC
SEW EURODRIVE 08238960 UFP11A-00 PROFIBUS DP-V1
Baumer Electric SCATEC-2 FLDK 110C1002/S42 Laser Sample Counter
PR1614 Philips PR1614/00 Control Panel
Siemens 5WG1 567-1AB22 GAMMA instabus 5WG1567-1AB22
SIEMENS C79040-A6430-C209-02-85
EWON FLEXY20500_00MA/S WHIT MODULE FLB3202
B&R 5PC600.SX01-00 REV. K0
BELIMO BLF230
Honeywell AQS71-KAM CO2 SENSOR
Emerson Unidrive SP1401
HITACHI IOLH-TA 33022713-1
HITACHI EH-YR16 1696-0167
HITACHI EH-AY22 1696-0178
LENZE ESMD371X2SFAXX2R22 Frequency Inverter Lenze 0.37 kW
JETTER PASS-E/E-GRU
DELTA DOP-B07S411
6. To turn off the UPS and have it stay off (requiring local interaction to
turn it back on), change Load Segment to Restart following the Return of
AC Power to NO.
If you want to effectively reboot the UPS and the associated load,
then set Load Segment to Restart following the Return of AC Power to
YES and set Delay Before Segment Restart to a valid delay value to
allow the UPS to restart after the specified delay.
7. After choosing the desired values, select Set Values to update the
card with the new information.
8. Select Control from the ConnectUPS Web/SNMP Card menu at the
top of the home page and select Load Segment “ALL” or the
appropriate load segment “NUMBER(S)”. Then select Turn UPS Off.
9. To initiate the shutdown sequence select Set Values. The card
sends the appropriate information to the UPS and any clients
running the NetWatch client software.
Embedded Linux was specially developed for embedded
systems in the context of modern machine automation.
It makes the devices future-proof, particularly in terms of cyber
security. As before, PLC programming is carried out using
CODESYS, the established and industry-wide standard for
programming control systems.
The devices are housed in a plastic casing and can also be used
in portrait format. The integrated non-volatile memory can be
easily expanded via an SD card, if required. In addition to the
Ethernet interface, CANopen, RS232 and RS485 interfaces are
also available, depending on the device type.
Eaton’s Power-Sure 700 is a tap changing transformer that can solve
99 percent of electrical disturbance problems to better protect your
equipment. This computer-grade, three-phase transformer features
standard and advanced metering with 97 perfect efficiency.
Combining the reliable frequency regulation you expect from an
Eaton tap changing transformer with high frequency filtering and
an optional manual bypass switch, the Power-Sure 700 is the ideal
transformer for any industrial application.
Increase profitability by reducing equipment downtime
Frequent brownouts and voltage regulation problems cause costly
downtime. The Power-Sure 700 is uniquely designed with a high in-rush
current and rapid response to protect equipment and facilities against
those problems.