OMRON CS1G-CPU44-EV1 PLC

OMRON CS1G-CPU44-EV1 PLC

Nine new high-end CS1 CPUs extend the

versatility of the CS1 controller family. The

CS1G/H-CPU**-V1 CPUs offer customers

advanced functions, including simple backup

and exchange of programs using a memory

card and faster NT links with select NT

series touch screens. The combination of

speed and power in these CPUs will allow

customers to integrate more detailed

functions into their production process and

simplify setup and maintenance.

Enhanced Memory Card Functions

♦ Simplified data collection/exchange, and backup of program and settings

♦ Automatic transfer of data (DM/EM) files at power up

♦ Simplified program backup function

♦ Program switch function

♦ Supports standard “CSV/TXT” formats with Data File Read/Write

Instructions

♦ Select and operate any file within the memory card using the CPU’s user

program and CMND instruction

System Performance Enhancements

♦ Faster online editing for program changes

♦ Supports high-speed NT Links (115k baud) with Omron NT31-V2 and

NT631-V2 series touchscreens.

Feature Benefits Application

Data files supported in CSV

format and as text files

(.TXT)

It is now possible to read hexadecimal data

within I/O memory in CSV format and as text

files by using the FREAD and FWRIT

instructions.

Log production results and other data

in the CPU I/O memory to the

Memory Card in CSV or text format.

This data and can be read and edited

using spreadsheet software within a

PC via a Memory Card Adapter.

Conversely, settings stored in CSV or

text format in the Memory Card by

spreadsheet software can be read into

the CPU module I/O memory.

File manipulation (format,

delete, etc.) using

instructions

The CPU can manipulate its own file memory

using the CMND instruction.

Operations such as format file, delete,

copy, change name, and create

directory can be manipulated on the

Memory Card from the ladder program

during operation.

Program replacement during

operation

It is now possible to read (replace) the entire

user program from the Memory Card to the CPU

during operation.

Switching control operations without

stopping PLC.

Replacing programs without using

Programming Devices.

Data files are available for

automatic transfer when

power is turned ON

Now DM files and EM files for automatic

transfer to the CPU can be read when the system

power is turned ON.

Storing data settings in data memory

when the power is turned ON.

Reading data automatically when the

power is turned ON instead of

requiring a FREAD instruction.

Easy backup All data (user programs, parameters, and I/O

memory) can now be backed up on the Memory

Card by pressing the Memory Card power

supply switch when the simple backup setting

has been made with the DIP switch.

If a malfunction occurs, all data in the

CPU at that time can be recorded

without using a Programming Device.

Faster online editing If part of the program is changed by the

Programming Device when the CPU is in

MONITOR mode, the extension in cycle time

for overwriting has been reduced.

Previously the maximum extension to the cycle

time was 90ms.  It is now 12ms.

Reduced program maintenance time.

Faster NT Links Now supports high-speed NT Links (1:N mode).

Faster communications with Touch Screens than

the previous standard NT Links allowed (1:N

mode).  Achieve high-speed NT Links with:

NT31-V2 and NT631-V2 terminals only.

Monitoring equipment settings using

Touch Screens is now performed at a

faster speed