OMRON NSJW-ETN21 ETHERNET HMI
OMRON NSJW-ETN21 ETHERNET HMI
Setup Tool ports are provided as standard feature. Use these ports to connect a computer to the
Digital Temperature Controller. The E58-CIFQ2 USB-Serial Conversion Cable is required to
connect to the port on the top panel. The E58-CIFQ2 USB-Serial Conversion Cable and E58
CIFQ2-E Communications Conversion Cable are required to connect to the port on the front panel.
(You cannot leave either port connected constantly during operation.)
Recommended panel thickness is 1 to 8 mm.
•Group mounting is not possible in the vertical direction. (Maintain the
specified mounting space between Controllers.)
•To mount the Controller so that it is waterproof, insert the waterproof
packing onto the Controller.
NSJW-ETN21
| IC693RDL753K GE Discrete output module |
| 330910-05-23-10-02-00 3300 XL 11 mm Probe Bently Nevada |
| 330910-04-13-10-02-00 Bently Nevada 3300 XL 8 mm Proximity Probes |
| 330910-05-21-10-02-00 3300 XL 11 mm Probe Bently Nevada |
| 330105-02-12-10-02-0N Bently Nevada 3300 XL 8 mm Reverse Mount Probe |
| 330180-X2-05 Bently Nevada 5/8 mm Proximity Sensor |
| 1783-BMS06SGA Allen Bradley Stratix 5700 managed Ethernet switch |
| PM5630-2ETH 1SAP131000R0278 ABB AC500 Processor module |
| TB5610-2ETH 1SAP111300R0278 ABB AC500 Terminal base |
| CM579-PNIO 1SAP170901R0101 ABB Communication module |
| PR9268/206-100 Absolute vibration sensor EPRO |
| 5X00109G01INPUT MODULE EMERSON |
| 5X00119G02 INPUT MODULE EMERSON |
| AKM54K-ACCNR-00 KOLLMORGEN AKMSeries Servo Motor |
| GVC714A101 3BHB045668R0001 ABB Silicon Controlled Rectifier |
| GVC714A1013BHB045647R0006 ABB Silicon Controlled Rectifier |
| GVC713A101 3BHB045668R0006 ABB Silicon Controlled Rectifier |
| GVC713A101 3BHB045647R0005 ABB Silicon Controlled Rectifier |
| GVC703AE01 3BHB045668R0002 ABB Silicon Controlled Rectifier |
| GVC703AE01 3BHB045647R0008 ABB Silicon Controlled Rectifier |
| GVC703AE01 3BHB045647R0004 ABB Silicon Controlled Rectifier |
•When two or more Controllers are mounted, make sure that the sur
rounding temperature does not exceed the allowable operating tem
perature specified in the specifications.
The Waterproof Packing is provided with the Temperature
Controller.
Order the Waterproof Packing separately if it becomes lost or
damaged.
The degree of protection when the Waterproof Packing is used
is IP66.
Also, keep the Port Cover on the front-panel Setup Tool port
of the E5EC/E5EC-B/E5AC securely closed.
To maintain an IP66 degree of protection, the Waterproof
Packing and the Port Cover for the front-panel Setup Tool port
must be periodically replaced because they may deteriorate,
shrink, or harden depending on the operating environment.
The replacement period will vary with the operating
environment.
Check the required period in the actual application.
Use 3 years or sooner as a guideline.
Order this Port Cover
separately if the Port Cover on
the front-panel Setup Tool port
is lost or damaged. The
Waterproof Packing must be
periodically replaced because
it may deteriorate, shrink, or
harden depending on the
operating environment.
One pair is provided with the
Controller.
Order the Mounting Adapter
separately if it becomes lost
or damaged