OMRON NS8-TV00B-V2 NS8-TV00-V2 NS8-TV00B-ECV2 NS8-TV00-ECV2 touch display Panel
OMRON NS8-TV00B-V2 NS8-TV00-V2 NS8-TV00B-ECV2 NS8-TV00-ECV2 touch display Panel
The Waterproof Packing is provided with the Temperature Controller.
Order the Waterproof Packing separately if it becomes lost or damaged.
The Waterproof Packing can be used to achieve an IP66 degree of protection.
(Deterioration, shrinking, or hardening of the waterproof packing may occur depending on the operating
environment. Therefore, periodic replacement is recommended to ensure the level of waterproofing
specified in IP66. The time for periodic replacement depends on the operating environment.
Be sure to confirm this point at your site. Consider three years a rough standard.
A clearer display that is easier to read.
Easy setup/operation and packed with
| IS210DSVOH1AA GE Simplex DIN-Rail Mounted Servo Terminal Board |
| IS210DSCBH1A GE Mark VI printed circuit board |
| IS215UCVEM05A GE MARK VI GENERAL ELECTRIC CARD MK6 |
| IS215UCVEM05 GE BOARD MARK VI |
| IS215UCVEM02A GE MARK VI 4 PORT ETHERNET BOARD |
| IS215UCVEM02 GE MARK 6 GENERAL ELECTRIC UCVEH2A 4 ETHERNET CONTAINER BOARD |
| IS215UCVEH2AAF GE VME CONTROLLER GE BOARD-VMIC MARK VI |
| IS215UCVEH2AAE GE VME CONTROLLER GE BOARD-VMIC MARK VI |
| IS215UCVDH7A GE Status and Communication Card |
| IS215UCVDH5A GE VME Assembly Board for use in UC2000 Gas Turbine Control Systems |
| IS215UCVDH2AM GE double-slot controller board |
| IS215UCVDH2AK GE controller for the Mark VI system |
| IS215UCVDH2AA GE controller that runs turbine application code |
| IS215UCVDH2A GE double board computer |
| IS215UCVDH1A GE AMD-K6 processor |
| IS215UCVCH5 GE Mark VI UCV controller |
| IS215UCVBG1A GE Mark VI controller component |
| IS215UCCCM04A GE MARK VI GE CONTROLLER BOARD 3U COMPACT PCI |
| IS215UCCAH3A GE single-slot board |
| IS215PMVDH1A GE Boards and Turbine Control |
| IS215PCMIH1A GE Mark VI to Mark VIe Interface IS215PCMIH1A VME Card Assembly |
| IS215WEPAH2BB GE Mark VI Printed Circuit Board |
| IS215WEMAH1BA GE Mark VIe Wind Energy Main Cabinet board |
performance.
• The white PV display with a height of 15.2 mm improves visibility.
• High-speed sampling at 50 ms.
• Select from models with screw terminal blocks, models with
Push-In Plus terminal blocks for reduced wiring work, and
Plug-in Models that can be removed from the terminal block.
• Short body with depth of only 60 mm. (Screw Terminal Blocks)
• Easy connections to a PLC with programless communications.
Use component communications to link Temperature
Controllers to each other.
• Set up the Controller without wiring the power supply by
connecting to the computer with a Communications Conversion
Cable (sold separately). Setup is easy with the CX-Thermo
(sold separately).
1.Options with HB and HS alarms (001 and 003) cannot be selected if a linear current output is selected for the control output.
*2.The control output cannot be used as a transfer output.
*3.Option 004 can be selected only when “CX” is selected for the control outputs.
Note:Draw-out-type models of the E5CC are available. Ask your OMRON representative for details.
Heating and Cooling Control
Using Heating and Cooling Control
A Control Output Assignment
If there is no control output 2. an auxiliary output is used as the cooling control output.
If there is a control output 2. the two control outputs are used for heating and cooling.
(It does not matter which output is used for heating and which output is used for cooling.)
B Control
If PID control is used, you can set PID control separately for heating and cooling.
This allows you to handle control systems with different heating and cooling response characteristics