KEBA XW020-200 20 m Ethernet/EtherCAT cables
Product features
• Up to 8 digital inputs
• 8 digital 2 A outputs
• 2 digital inputs with interrupt
• Short-circuit detection
• Permanently short-circuit proof
• Electronic rating plate
Short description
The DM 27x/A series is a digital input/output module of the KeConnect C2 product line and enables the connection of 6
or 8 digital inputs and 8 digital outputs. 24 V DC control signals are captured by the digital inputs and transmitted galva
nically isolated to the higher-level automation device. In addition, two of the digital inputs can be used as interrupt inputs.
The digital outputs switch the 24 V DC control signals of a CPU module galvanically isolated from the connected actua
tors. In addition to the short-circuit connection, outputs that cause short circuits can be switched off individually.
This module is attached directly to a CPU module or can be operated with all KEBA controls by means of a bus coupler.
Digital inputs
DM 272/A DM 276/A
Number / wiring of inputs 8x sink 6x source
Input type Type 1 (acc. to EN 61131-2)
Voltage range for “1” 15 V ≤ UH ≤ 30 V
Voltage range for “0”-3 V ≤ UL ≤ 5 V
Debouncing Configurable 1 ms, 100 ms
Cycle time 1 ms
Status display Green LED
Galvanic isolation Yes, electric strength 707 V with isolated ground connection
Interrupt inputs
Number of inputs Two of the digital inputs can be used as interrupt inputs
Voltage range for “1” 15 V ≤ UH ≤ 30 V
Voltage range for “0”-3 V ≤ UL ≤ 5 V
Response time of the K-bus interrupt 50 μs
Status display Green LED
Galvanic isolation Yes