KEBA

KEBA XW020-050 5 m Ethernet/EtherCAT cables

● The nominal current IN

must be selected to match the circuit breaker and back-up fuse.

Dimensioning of the line circuit breaker:

When dimensioning the line circuit breaker also observe the increased environmental temperatures inside

the switch cabinet. Under certain circumstances, this can make a reduction of the charging current specifica

tion necessary in order to increase the system availability.

● Determine the nominal current according to the type plate specification in coordination with the desired

charging capacity (DIP switch settings for charging current specification) and the power supply line.

Dimensioning of the power supply line:

When dimensioning the power supply line also observe the possible reduction factors and the increased en

vironmental temperatures in the interior connection area of the charging station (see temperature rating of

the supply terminals). Under certain circumstances, this can lead to an increase of the cable cross-section

and to the adaptation of the temperature resistance of the power supply line.

Wireless Mobile IPC HMI with integrated safety

Combine your HMIs – PLC, Robot, and ERP system along with safety into

one device for simple and mobile operator control that

increases productivity and safety.

Surplus Open Woodhead SST-PFB-CLX PROFIBUS DP Remote I/O Scanner Module

Woodhead SST-PB3-PCU V1.7.2 PB3-PCI SHIP EXPRESS P4147B YL

SST Woodhead SST-PFB-REL Profibus Network Interface Module

SST Woodhead DNP-CPCI-3U-4 DeviceNet Scanner PCB Card AMAT 0190-16927 Lot of 6

Woodhead Bradcommunicat ions Backplane Communications SST-IBS-CLX-RL

SST WOODHEAD 5136-SD-ISA REV: 2.4.1 INTERFACE CARD

WOODHEAD SST DHP-PCI V1.2.0 SD-PCI-U DATA HIGHWAY PLUS INTERFACE CARD

Molex SST-PB3-VME-2 Brad Communication Board SSTPB3VME2E

SST Woodhead SST-ESR2-CLX-RLL Ethernet Modbus/Serial Modbus Communication

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注