Foxboro P0400TH-F Control Module
INTELLIGENT TRANSMITTER FEATURES AT
AN ECONOMICAL PRICE
When you want the flexibility and performance of a
configurable, intelligent transmitter, but you don’t
need a digital output signal, these transmitters
provide exceptional benefits at a very affordable
price:
Liquid Crystal Display (LCD) Digital Indicator
with On-Board Pushbuttons
Pushbutton Configuration and Calibration:– Zero and Span Settings– Adjustable Damping– Forward or Reverse Output– Failsafe Output; upscale or downscale– Reranging without applying pressure
GENERAL SPECIFICATIONS COMMON TO ALL TRANSMITTERS
I/A Series Pressure Transmitter Family
These transmitters are part of a complete family of
d/p Cell®, gauge, absolute, multirange,
multivariable, and premium performance
transmitters, as well as transmitters with remote or
direct connect pressure seals, all using field-proven
silicon strain gauge sensors and common topworks.
Select the electronics module you need to provide
just the right level of intelligence for your application
and budget. If your needs change, the modular
design allows easy migration to other protocols –
including FoxCom™, HART, FOUNDATION fieldbus,
and analog 4 to 20 mA versions.
High Performance
Microprocessor-based correction provides excellent
accuracy and ambient temperature compensation.
Output Signal
1to5Vdc
Output Load
1 to 10 megohms
Supply Voltage and Current Requirements
SUPPLY VOLTAGE
9 to 15.5 V dc (Normal Operation)
SUPPLY CURRENT
3 mA
Supply Voltage Effect
The output changes less than 0.005% of calibrated
span for each 1 V change within the specified supply
voltage requirements.
Power-Up Time
Less than 5.0 seconds for output to reach first valid
measurement.
Mounting Position
The transmitter may be mounted in any orientation.
Mounting Position Effect
Any zero effect caused by the mounting position can
be eliminated by rezeroing. There is no span effect.
Field Wiring Reversal
Reversal of field wiring will not damage transmitter.
Suppressed Zero and Elevated Zero Ranges
These ranges are acceptable as long as Span and
Range limits are not exceeded. Elevated zero
applies to IGP20 and IDP10 Transmitters only.
Zero and Span Adjustments
Zero and span adjustments accomplished using the
pushbuttons on the LCD Indicator. See Figure 3
| PHILIPS | 958481320100 LCB |
| PHILIPS | 958481320201 PROC PLUS |
| PHILIPS | 958481320201 PROC+ |
| PHILIPS | 958481320400 PIF |
| PHILIPS | 958481321200 PD216 |
| PHILIPS | 958481321210 PD212 |
| PHILIPS | 958481321220 PD208 |
| PHILIPS | 958481321300 350211080380 |
| PHILIPS | 958481321300 PSB |
| PHILIPS | DSI020 |
| PHILIPS | OPM010 |
| PHILIPS | PR1613 |
| PHILIPS | SCM040 |
| PHILIPS | VBM010 |
| PHILIPS | VBM030 |
| PHOENIX | 2961192 |
| PHOENIX | E-UK |
| PHOENIX | FLMC10BASE-T/FO G850 |