FOXBORO

Foxboro CP40 Control Processors Brand

Pressure Seals

Pressure seals are used with the I/ASeries

Transmitters when it is necessary to keep the

transmitter isolated from the process. A sealed

system is used for a process fluid that may be

corrosive, viscous, subject to temperature extremes,

toxic, sanitary, or tend to collect and solidify.

Table2 and Table3 lists the various pressure seals

that can be used with these transmitters. To order a

transmitter with seals, both a Transmitter Model

Number and Seal Model Number are required. See

PSS2A-1Z11A for a complete listing of pressure

seal models and specifications. Also see Figure4 for

typical transmitter/pressure seal configurations.

Table 2.  Pressure Seals Used with I/A Series Pressure Transmitters

Direct Connect Pressure Seal Assemblies

Seal Model Seal Description Process Connections

PSFLT Flanged, Direct Connect (Flanged Level), Flush or

Extended Diaphragm

ANSI Class 150/300/600 flanges and

BS/DINPN10/40. 10/16. 25/40 flanges

PSFAD Flanged, Direct Connect, Recessed Diaphragm ANSI CLass 150. 300. 600. 1500 flanges

PSTAD Threaded, Direct Connect, Recessed Diaphragm 1/4. 1/2. 3/4. 1. or 1 1/2 NPT internal thread

PSISD In-Line Saddle Weld, Direct Connect, Recessed

Diaphragm

RELIANCE 0-57C406-E
RELIANCE 0-57C407-4H
RELIANCE 0-57C408-B
RELIANCE 0-57C411-2
RELIANCE 0-60002-6
RELIANCE 0-60007-2
RELIANCE 0-60010-E
RELIANCE 0-60031-5
RELIANCE 0-60063-1
RELIANCE 0-60063-2
RELIANCE 0-60067-1
RELIANCE 0-60067-A
RELIANCE 30V4060
RELIANCE 45C992
RELIANCE 57045
RELIANCE 57401

Lower housing of seal is in-line saddle welded to

nominal 3- or 4-inch (and larger) Pipe

PSSCT Sanitary, Direct Connect (Level Seal), Flush

Diaphragm

Process Connection to Sanitary Piping with 2-or

3-inch Tri-Clamp

PSSST Sanitary, Direct Connect (Level Seal), Extended

Diaphragm

Process Connection to 2-in Mini Spud or 4-in

Standard Spud; Tri-Clamp

Remote Mount, Capillary-Connected Pressure Seal Assemblies

Seal Model Seal Description Process Connections

PSFPS Flanged, Remote Mount, Flush Diaphragm ANSI Class 150/300/600 flanges and

BS/DIN PN10/40 flanges

PSFES Flanged, Remote Mount, Extended Diaphragm ANSI Class 150/300/600 flanges and

BS/DIN PN 10/40. 10/16. 25/40 flanges

PSFAR Flanged, Remote Mount, Recessed Diaphragm ANSI Class 150/300/600/1500 flanges

PSTAR Threaded, Remote Mount, Recessed Diaphragm 1/4. 1/2. 3/4. 1. or 1 1/2 NPT internal thread

PSISR In-Line Saddle Weld, Remote Mount, Recessed

Diaphragm

Lower housing of seal is in-line saddle welded to

nominal 3- or 4-inch (and larger) Pipe

PSSCR Sanitary, Remote Mount, Flush Diaphragm Process Connection secured with a Tri-Clamp to a

2- or 3-inch pipe

PSSSR Sanitary, Remote Mount, Extended Diaphragm Process Connection to 2-in Mini Spud or

4-inStandard Spud; Tri-Clamp

PSFFR Flanged, Remote Mount, Flush Diaphragm ANSI Class 150/300/600 flanges and DIN/BS PN

10/40

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注