SHINKAWA VM-75B POWER SUPPLY MODULE

VM-75□B POWER SUPPLY MODULE

NPUT

Rated voltage : VM-751B (AC) : 100-240VAC/50-60Hz

VM-753B (DC24V) : 24VDC

VM-754B (DC110-220V)

: 110-220VDC

Power consumption : VM-751B (AC)

Rack configuration A*2 : 206VA / 100VAC

196VA / 240VAC

Rack configuration B*3 : 217VA / 100VAC

217VA / 240VAC

VM-753B(DC)

Rack configuration A*2 ：200W / 24VDC

Rack configuration B*3 ：212W / 24VDC

VM-754B (DC110-220V)

Rack configuration A*2 : 204W / 110VDC

196W / 220VDC

Rack configuration B*3 : 212W / 110VDC

212W / 220VDC

*2 Rack configuration A : VM-741Bx1.VM-742Bx2.VM-701B/PM0/ALYx11

*3 Rack configuration B : VM-741Bx1.VM-742Bx2.VM-701B/PM1/ALYx11

Voltage range : VM-751B (AC) : 85-264VAC

VM-753B (DC) ：21.6-26.4VDC

VM-754B (DC110-220V)

: 88-253VDC

OUTPUT

Power output : Output to each module via mother board

Rated Voltage : 26V (Primary)、24V (Secondary)

Rated Power : 180W

Indicators : POWER-OK LED (Green)

Normal : ON

Abnormal : OFF

Contact output : Output points : 1point

Contact type : Dry CONTACT (SPDT)

Enegization method: Normally Energized

Contact capacity : 250VAC / 5A、30VDC / 5A

ENVIRONMENTAL CONDITION

Operating temperature  :  0 to +65°C

Operating temperature at explosion proof construction

:  0 to +60°C

Storage temperature  :  -30 to +85°C

Relative humidity  :  20 to 95%RH (non-condensing)

INSULATION RESISTANCE

Between power supply and contact ,GND  : 100MΩ at 500VDC

DIELECTRIC STRENGTH

Between power supply and GND : 2000VAC  one minute

Between contact and GND : 500VAC  one minute

MATERIAL AND FINISH

Face plate : ABS (Black)

Sheet : Polyester tough top (Gray)

Base plate : Alminium alloy (Silver)

MASS

Body : Max. 1.5kg ( 3.3lb )

Contact type Enagization method Power OFF

Power ON

Normal state Abnormal state

N.O. contact NORMALLY ENERGIZED OPEN CLOSE OPEN

N.C. contact NORMALLY ENERGIZED CLOSE OPEN CLOSE