SHINKAWA VM-75B POWER SUPPLY MODULE
VM-75□B POWER SUPPLY MODULE
NPUT
Rated voltage : VM-751B (AC) : 100-240VAC/50-60Hz
VM-753B (DC24V) : 24VDC
VM-754B (DC110-220V)
: 110-220VDC
Power consumption : VM-751B (AC)
Rack configuration A*2 : 206VA / 100VAC
196VA / 240VAC
Rack configuration B*3 : 217VA / 100VAC
217VA / 240VAC
VM-753B(DC)
Rack configuration A*2 ：200W / 24VDC
Rack configuration B*3 ：212W / 24VDC
VM-754B (DC110-220V)
Rack configuration A*2 : 204W / 110VDC
196W / 220VDC
Rack configuration B*3 : 212W / 110VDC
212W / 220VDC
*2 Rack configuration A : VM-741Bx1.VM-742Bx2.VM-701B/PM0/ALYx11
*3 Rack configuration B : VM-741Bx1.VM-742Bx2.VM-701B/PM1/ALYx11
Voltage range : VM-751B (AC) : 85-264VAC
VM-753B (DC) ：21.6-26.4VDC
VM-754B (DC110-220V)
: 88-253VDC
OUTPUT
Power output : Output to each module via mother board
Rated Voltage : 26V (Primary)、24V (Secondary)
Rated Power : 180W
Indicators : POWER-OK LED (Green)
Normal : ON
Abnormal : OFF
Contact output : Output points : 1point
Contact type : Dry CONTACT (SPDT)
Enegization method: Normally Energized
Contact capacity : 250VAC / 5A、30VDC / 5A
ENVIRONMENTAL CONDITION
Operating temperature : 0 to +65°C
Operating temperature at explosion proof construction
: 0 to +60°C
Storage temperature : -30 to +85°C
Relative humidity : 20 to 95%RH (non-condensing)
INSULATION RESISTANCE
Between power supply and contact ,GND : 100MΩ at 500VDC
DIELECTRIC STRENGTH
Between power supply and GND : 2000VAC one minute
Between contact and GND : 500VAC one minute
MATERIAL AND FINISH
Face plate : ABS (Black)
Sheet : Polyester tough top (Gray)
Base plate : Alminium alloy (Silver)
MASS
Body : Max. 1.5kg ( 3.3lb )
Contact type Enagization method Power OFF
Power ON
Normal state Abnormal state
N.O. contact NORMALLY ENERGIZED OPEN CLOSE OPEN
N.C. contact NORMALLY ENERGIZED CLOSE OPEN CLOSE