Eaton EASY204-DP Communication Module

Configuring E-Mail Notification

You may use the ConnectUPS Web/SNMP Card to inform selected

e-mail accounts of events and changes in status as they occur in the

UPS or to provide a daily status message at a predetermined time.

1. Select Configuration from the menu at the top of the home page,

then Email Notification.

2. Become the Superuser and then enter the IP address or Hostname

of the SMTP Mail Server that will be used to send the e-mail

messages (see Figure 7).

If you entered a host name for the mail server, you must enter the

IP address of your network DNS Server in the DNS Address block.

3. To receive a daily status report, enter the time of day to send the

e-mail (in 24-hour format).

4. Enter the Mail Account, Description, Mail Type, Event Level, and Event

Type for each recipient. The Mail Account must be a valid e-mail

address. Refer to the online help file for more details about these

fields.

5. Select Set Values to save your changes

The XV-102 devices with an Embedded Linux operating system

seamlessly integrate into Eaton CCoE’s ‘Defense in Depth’ cybersecurity

concept. The devices boot from a write protected memory, and only

operating system software updates signed by Eaton can be installed

on the devices. All device settings and interfaces are secured via

password entries, which also withstand a brute force attack.

Communication channels can be selectively activated and encrypted

for the required tasks. However, cybersecurity and usability are not

mutually exclusive. Guided by the first-boot agent, the prepared

application software and device configuration are installed easily and

efficiently via a USB memory during machine or system commissioning.

The application software and process data can optionally be installed

on an encrypted SD card, and in the event of a device replacement,

the application-specific data can simply be taken over to the replacement

device.