Vibro-Meter Protective measuring card MPC4 Mk2 SIL2 601-041-A10
Protective measuring card MPC4 Mk2 SIL2 601-041-A10
Optionally, relay modules, and rack controller and
communications interface modules can also be
included.
Two types of rack are available: a VM600Mk2 system
rack (ABE04x – 6U) that can house up to twelve
monitoring modules, and a VM600Mk2 slimline rack
(ABE056 – 1U) that can house one monitoring
module. The racks are typically mounted in standard
19″ rack cabinets or enclosures installed in an
equipment room.
Different VM600Mk2 monitoring modules are
available for machinery protection, condition
monitoring and/or combustion monitoring
applications. For example, the MPC4Mk2 + IOC4Mk2
modules (available in standard and SIL versions)
support both machinery protection and condition
monitoring, the XMV16 + XIO16T module supports
extended condition monitoring for vibration
applications, and the XMC16 + XIO16T module
supports extended condition monitoring for
combustion applications.
In VM600Mk2 systems, the AMC10Mk2 + IOC10Mk2
temperature and analog monitoring module adds
machinery protection and condition monitoring
support for applications with large numbers of slowly
varying (quasi-static) analog signals, such as
temperature and other process variables.
Note: For VM600Mk2 MPC4Mk2 + IOC4Mk2 modules,
machinery protection functionality is available by
DESCRIPTION (continued)
default and condition monitoring functionality is
optional. For VM600Mk2 AMC10Mk2 + IOC10Mk2
modules, both machinery protection and condition
monitoring functionality are available by default. It is
important to note that condition monitoring
functionality also depends on the purchased
VibroSight ® software license.
The RLC16Mk2 relay modules (standard and SIL
versions) are optional modules used to provide
additional relays when the four user-configurable
relays per MPC4Mk2 + IOC4Mk2 module and/or the
two user-configurable relays per
AMC10Mk2 + IOC10Mk2 module are not sufficient for
an application.
The CPUMMk2 + IOCNMk2 rack controller and
communications interface module is an optional
module used to provide additional VM600Mk2 system
functionality such as fieldbus communications;
module data aggregation, processing and sharing;
rack and/or fieldbus communications redundancy;
front-panel alarm reset (AR); MPS rack (CPUx)
security; system event and measurement event
logging.
MPC4 Mk2 SIL2
VM600Mk2 rack-based monitoring systems
complement the VibroSmart ® distributed monitoring
systems that are also available from Parker Meggitt’s
vibro-meter ® product line, and are compatible with
the same VibroSight ® machinery monitoring
software suite.
MPC4Mk2 + IOC4Mk2 modules and
VM600Mk2 racks
MPC4Mk2 + IOC4Mk2 machinery protection and
condition monitoring modules are used as part of a
VM600Mk2 rack-based monitoring system.
A MPC4Mk2 module is always used with an
associated IOC4Mk2 module as a pair/set of modules
and can be used in a VM600Mk2 system rack
(ABE04x) or a slimline rack (ABE056).
Both the MPC4Mk2 and the IOC4Mk2 are single-width
modules that occupy a single VM600Mk2 rack slot
(module position). The MPC4Mk2 is installed in the
front of a VM600Mk2 rack and the associated
IOC4Mk2 is installed in the rear of the rack, in the slot
directly behind the MPC4Mk2. Each module connects
directly to the rack’s backplane using two
connectors