ADLINK cPCI-6700B Industrial Control Board

ADLINK cPCI-6700B Industrial Control Board

Unique Product Description

The ADLINK cPCI-6700B is a high-density, high-reliability 6U CompactPCI processor blade designed for critical industrial computing and embedded controller systems.

Built on the standardized PICMG 2.0 CompactPCI modular framework, the cPCI-6700B combines workstation-grade processing power, robust I/O capabilities, and enhanced thermal endurance.

Designed to operate seamlessly in $24/7$ continuous mission-critical environments, the cPCI-6700B integrates high-speed bus interfaces, onboard memory, and extended connectivity options across both front panel ports and rear transition modules (RTM).

Its eurocard form factor and pin-and-socket connector architecture protect against mechanical vibration, making it a staple solution for industrial, defense, railway, and telecommunication infrastructure.

Product Advantages and Features

Rugged Mechanical Architecture: Engineered to PICMG 2.0 Eurocard mechanical specifications, utilizing gas-tight IEC 61076-4-101 multi-pin connectors to resist severe vibration, shock, and thermal expansion.

High-Speed System Bus & I/O: Supports standard 32-bit/64-bit CompactPCI bus speeds alongside onboard Gigabit Ethernet, high-speed USB, RS-232/422/485 serial communications, and high-definition display outputs.

Hot-Swap Support: PICMG 2.1 compliant hot-swapping capability allows module insertion or removal without requiring a full rack power shutdown.

Flexible Expansion via RTM: Works in tandem with Rear Transition Modules (e.g., cPCI-R6700 / cPCI-R6002 series), routing secondary storage, extra network channels, display feeds, and GPIO lines to the rear of the rack chassis.

Extended Industrial Lifespan: ADLINK’s long-term COTS (Commercial Off-The-Shelf) product lifecycle ensures reliable supply, replacement, and long-term project support.

Application Cases

Rail Transportation & Signaling: Serves as the central computing unit in onboard Automatic Train Operation (ATO), Driver Machine Interfaces (DMI), and wayside signaling systems requiring EN50155 compliance.

Automated Substation & Power Grid Control: Deployed in power monitoring and SCADA control racks where high electromagnetic interference (EMI) resistance and uncompromised uptime are mandatory.

Semiconductor & Advanced Manufacturing: Powers high-throughput automated optical inspection (AOI) equipment, robotic motion control racks, and wafer handling systems.

Defense & Aerospace Ground Systems: Used in mobile command centers, radar data processing units, and harsh telemetry processing racks.

Technical Specifications Summary

Installation and Maintenance

Step-by-Step Installation

Electrostatic Safety: Put on an ESD anti-static wrist strap connected to an earth ground point prior to unpacking the board.

Backplane Slot Inspection: Inspect the target 6U CompactPCI slot in the subrack to ensure pin alignment is clear of debris or bent pins.

Slot Alignment: Slide the top and bottom edges of the cPCI-6700B into the card guide rails of the rack chassis.

Connector Engagement: Carefully push the card in until the rear J1/J2 multi-pin connectors press lightly against the backplane.

Locking: Simultaneously depress the top and bottom red-tab injector/ejector handles to securely seat the high-density connectors into the backplane receptacles.

Screw Securing: Fasten the two front-panel captive mounting screws using a Phillips screwdriver to prevent looseness caused by ambient vibration.

Maintenance Recommendations

Airflow Clearance: Clean intake fan filter meshes regularly in forced-air chassis to maintain optimal convection across board heatsinks.

Firmware Diagnostics: Use serial console redirects (COM1) or monitor connection during bootup to run diagnostic test cycles and check POST code outputs.

Hot-Swap Removal: When removing live modules, unlock the handle latch first to allow the microswitch signal to safely unmount system drivers before extraction.

Other Models in the Same Series

ADLINK offers a broad lineup of 6U CompactPCI processing blades and companion transition modules:

cPCI-6540 Series: 6U CompactPCI processor blade powered by 9th Gen Intel Core / Xeon processors with dual PMC/XMC expansion sites.

cPCI-6636 Series: High-performance 6U CompactPCI blade featuring Intel Xeon E3-1505M v5 processor and up to 32GB DDR4 memory.

cPCI-6630 Series: Modern replacement for legacy 6U processor blades, featuring high-bandwidth PCI Express topology.

cPCI-6210 Series: Dual-slot/single-slot 6U CompactPCI board based on 2nd Gen Intel Core i7 processors.

cPCI-R6700 / cPCI-R6500: Dedicated 6U Rear Transition Modules (RTM) designed to route rear I/O, display ports, and SATA drive bays