HIRSCHMANN RS20-1600M2M2SDAEHX09.0.00 Ethernet switch

HIRSCHMANN RS20-1600M2M2SDAEHX09.0.00

Product Introduction / Overview

The Hirschmann RS20-1600M2M2SDAEHX09.0.00 is an industrial-grade, DIN-rail mounted managed Layer 2 Fast Ethernet switch from the OpenRail RS20 family (Belden/Hirschmann).

Engineered for high-density localized automation systems, this model provides a combination of 16 Fast Ethernet ports, including two multi-mode fiber ports with SC connectors for interference-free optical connectivity over medium distances.

Running on Hirschmann’s enhanced software suite, it delivers comprehensive network management, high-availability redundancy, and robust cybersecurity features suitable for demanding industrial and utility networks.

Technical Parameter List

Product Features / Core Advantages

High-Density Hybrid Connectivity: Combines 14 RJ45 copper ports for localized field devices with 2 SC multi-mode optical ports for noise-immune fiber trunks back to core cabinets.

Industrial Redundancy Protocols: Supports Fast Ring Detection, Media Redundancy Protocol (MRP), and Rapid Spanning Tree Protocol (RSTP) for sub-20ms failover times in ring network topologies.

Dual Power Redundancy: Features dual DC power terminals with an integrated alarm signal contact to alert operators instantly in the event of power loop failure.

Granular Network Control: Complete administration via Web interface, Command Line (CLI), SNMP v1/v2c/v3. and HiVision integration.

Enhanced Management Security: Includes VLAN (802.1Q), IEEE 802.1X port-based access control, Quality of Service (QoS), and broadcast storm protection.

Model Classification (Breakdown of Model Structure)

RS20: Rail Switch series equipped exclusively with Fast Ethernet ports (10/100 Mbps).

16: Includes 16 total Fast Ethernet network interfaces.

00: Indicates no Gigabit uplink slots are present on this specific chassis.

M2M2: Interface 1 & 2 optics are 100BASE-FX Multi-Mode with SC connectors.

SD: Standard temperature range (0°C to +60°C) with standard DIN rail mounting.

AE: Enhanced Software Tier (offers extended Layer 2 switching & security features).

HX: Hirschmann Classic OpenRail Housing / Standard hardware variant.

09.0.00: Preset factory firmware software version.

Environmental Tolerance Conditions

Operating Temperature: 0°C to +60°C (Standard operational range).

Storage / Transport Temperature: -40°C to +70°C.

Relative Humidity: 10% to 95% (Non-condensing).

EMC Immunity: High immunity against electrostatic discharges (ESD) and surge voltages per EN 61000-6-2 standards.

Mechanical Stability: Certified high resistance against shock (15 g, 11 ms) and vibration (IEC 60068-2 standards).

Installation Method

DIN Rail Mounting: Hook the top clip onto the standard 35 mm DIN rail (EN 50022) and push the lower edge gently toward the rail until the mounting spring snaps firmly into place.

System Grounding: Fasten a low-impedance copper ground wire to the dedicated grounding terminal screw on the housing frame before attaching any network or power cabling.

Power Terminals: Wire primary and redundant DC power sources (12–48 V DC) to the terminal block connections (+24V / 0V for Power Input 1 and Power Input 2).

Cabling Connections:

Fiber: Remove protective dust plugs and insert multi-mode SC duplex fiber jumpers into the optical ports.

Copper: Insert standard RJ45 network cables until the retention tab clicks into position.

Operating Instructions

Power-On Sequence: Turn on power to either or both inputs; the system LED indicator will turn solid green once initialization finishes.

Initial Configuration & IP Setting:

Connect a configuration PC to one of the active RJ45 ports.

Use the Hirschmann HiDiscovery tool to locate the device’s MAC address and assign a static management IP address.

Management Access: Access the switch by entering its assigned IP address into a web browser, sign in with default administrator credentials, and immediately change the password.

Configuration Backup: Use an optional Auto-Configuration Adapter (ACA21-USB or ACA11) plugged into the local console/USB port to store automatic system backups for rapid swapouts.

SEO Optimization & Indexing Guide

Note on Web Indexing: Standardizing structural technical schema helps web search engines crawl and parse technical catalog items cleanly.

To ensure this model number (RS20-1600M2M2SDAEHX09.0.00) gets discovered and indexed by Google quickly:

Title Tag & Meta Description:

Title Tag: HIRSCHMANN RS20-1600M2M2SDAEHX09.0.00 Managed Switch Datasheet

Meta Description: Technical specifications, model classification breakdown, environmental parameters, and installation guide for Hirschmann RS20-1600M2M2SDAEHX09.0.00 switch.

Structured Data (Schema.org): Embed Product JSON-LD markup on your product landing page:

JSON

{

“@context”: “https://schema.org/”,

“@type”: “Product”,

“name”: “Hirschmann RS20-1600M2M2SDAEHX09.0.00”,

“mpn”: “RS20-1600M2M2SDAEHX09.0.00”,

“sku”: “943434023”,

“brand”: {

“@type”: “Brand”,

“name”: “Hirschmann”

},

“description”: “Industrial 16-Port Managed Ethernet Switch with 2 x Multi-Mode SC Fiber Ports”

}

URL Formatting: Ensure a clean URL structure, e.g., [https://yourdomain.com/hirschmann-rs20-1600m2m2sdaehx09-0-00](https://yourdomain.com/hirschmann-rs20-1600m2m2sdaehx09-0-00).

Google Search Console: Submit the live page URL using Google Search Console’s URL Inspection Tool -> Request Indexing.