OMRON

OMRON NJ501-1300 CUP Unit Programmable Controller

OMRON NJ501-1300 CUP Unit Programmable Controller

.The control output can be used as a simple transfer output for the Digital Temperature Controllers manufactured in July 2014 or later.

*2.Option 000 can be selected only if two auxiliary outputs are selected.

*3.Options 002 and 017 can be selected only if the control output is a relay output or voltage output and two auxiliary outputs are selected.

*4.Option 015 cannot be selected if the control output is a relay output or voltage output and two auxiliary outputs are selected.

Heating and Cooling Control

Using Heating and Cooling Control

A Control Output Assignment

GVC707AE01   3BHB045668R0005 ABB Silicon Controlled Rectifier
GVC707AE01 3BHB045647R0011 ABB Silicon   Controlled Rectifier
GVC700AE01 3BHB045647R0007 ABB Silicon   Controlled Rectifier
3500/42M-05-00 (140734-02+   135489-01Bently Nevada Proximitor Monitor
3500/25-01-01-00   (149369-01+135473-01Enhanced Keyphasor Module BENTLY NEVADA
330190-045-01-00 Bently Nevada 3300 XL   8mm Proximity Transducer System
1756-A4 Allen-Bradley ControlLogix   chassis
3HAC041443-003 Serial port measurement   SMB board ABB
DSQC658 3HAC025779-001 DeviceNet* Network   Interface Cards SST
489-P5-HI-A-20-E GE SR489 Generator   Management Relay
AKB331-M020 Yokogawa AKB331 Signal Cable   (50-50 pins)
PXI-8108 NI PXI Embedded Controller
990-05-70-01-CN-05 Bently Nevada 2-Wire   Vibration Transmitter
UTX.75.22F-NR GE Electronic Ultrasonic   Test Envelope Module
1769-L24ERQB1B Allen Bradley CompactLogix   5370 L2 packaged controller

An auxiliary output is used as the cooling control output.

B Control

If PID control is used, you can set PID control separately for heating

and cooling.

This allows you to handle control systems with different heating and

cooling response characteristics.

Model Model

HB alarm and HS alarm Communications Power supply voltage Power supply voltage

100 to 240 VAC 24 VAC/DC

Relay output 2——E5DC-RX2ABM-000 E5DC-RX2DBM-000

Detection for single-phase

heater RS-485 E5DC-RX2ABM-002 E5DC-RX2DBM-002——E5DC-RX0ABM-015 E5DC-RX0DBM-015

Voltage output

(for driving SSR)

2——E5DC-QX2ABM-000 E5DC-QX2DBM-000

Detection for single-phase

heater RS-485 E5DC-QX2ABM-002 E5DC-QX2DBM-002——E5DC-QX0ABM-015 E5DC-QX0DBM-015

Linear current

output

2——E5DC-CX2ABM-000 E5DC-CX2DBM-000—RS-485 E5DC-CX0ABM-015 E5DC-CX0DBM-015

2 E5DC-CX2ABM-015 E5DC-CX2DBM-015

NJ501-1300

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注