Omron C500-ID219 3G2A5-ID219 System Microprocessor

Omron C500-ID219 3G2A5-ID219 System Microprocessor

.Set value: 5. Upper- and lower-limit with standby sequence

For Upper- and Lower-Limit Alarm Described Above *2

•Case 1 and 2

Always OFF when the upper-limit and lower-limit hysteresis overlaps.

• Case 3: Always OFF

*5.Set value: 5. Upper- and lower-limit with standby sequence

Always OFF when the upper-limit and lower-limit hysteresis

overlaps.

*6.Refer to the E5@C Digital Temperature Controllers User’s Manual

(Cat. No. H174) for information on the operation of the standby

sequence.​

*7.Refer to the E5@C Digital Temperature Controllers User’s Manual

(Cat. No. H174) for information on the loop burnout alarm (LBA).

This setting cannot be used with a position-proportional model.

*8.Refer to the E5@C Digital Temperature Controllers User’s Manual

(Cat. No. H174) for information on the PV change rate alarm.

*9.When heating/cooling control is performed, the MV absolute

upper limit alarm functions only for the heating operation and the

MV absolute lower limit alarm functions only for the cooling

operation.

*10.This value is displayed only when a remote SP input is used. It

functions in both Local SP Mode and Remote SP Mode.