KEBA

KEBA XW599-020 2 m Mini I/O cables

Digital outputs

DM 272/A DM 276/A

Number / wiring of outputs 8x source 8x sink

Nominal voltage 24 V DC

Processing time 1 ms

Nominal current of digital outputs 2 A at 50 % simultaneity

Protection facility Short-circuit protection

Max. inductive load 1 J at max 0.2 Hz

Status display Orange LED

Galvanic isolation Yes, from the control electronics and between one another,

electric strength 707 V with isolated ground connection

Dimensions, weight

Height 120 mm

Width 22.5 mm front plate / 32.5 mm incl. K-bus plug

Depth 100 mm

Weight 135 g

General

Supply voltage 24 V DC from front

(nominal voltage tolerance: 19.2 V to 30 V, acc. to EN 61131-2)

24 V DC from K-bus, 5 V DC from K-bus

Overvoltage category II

Protection class III acc. to EN 61131-2

Addressing on K-bus Via 16-digit address switch, on the side

Type of terminals Open – pitch 5.08 mm

Max. power consumption K-bus 24 V 1.9 W

KeTop T70 Mobile IPC HMIs

With the dramatic increase in robotics and safe collaborative

automation systems customers want one HMI that integrates

machine, motion, robotics, and safety.

//  Simplifies and increases safety of the operator‘s control

of the complete automation cell

//  Runs Windows 10 or HTML5 HMI software, Linux

optional

//  Rugged IP65 rating, drop and vibration tested, globally trus

ted HMI in the robotics industry

// Analog resistive touch screen

//  Fast response membrane keypad with communication

to PLC or Robot for accurate control

//  E-Stop and integrated safety enable provides safe

operation with robots, machine motion, and safety

monitored areas

Dimensioning of the power supply line:

When dimensioning the power supply line also observe the possible reduction factors and the increased en

vironmental temperatures in the interior connection area of the charging station (see temperature rating of

the supply terminals). Under certain circumstances, this can lead to an increase of the cable cross-section

and to the adaptation of the temperature resistance of the power supply line.

Wireless Mobile IPC HMI with integrated safety

Combine your HMIs – PLC, Robot, and ERP system along with safety into one device for simple and mobile operator control that

increases productivity and safety.

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注