FOXBORO P0800DC – Control module
an Limits (Absolute or Gauge Pressure Units)
kPa inH2O mbar
0.12 and 7.5 0.5 and 30 1.2 and 75 (IGP20 only)
0.87 and 50 3.5 and 200 8.7 and 500
A (d)
MPa psi bar
0.007 and 0.21 1 and 30 0.07 and 2.1
0.07 and 2.1 10 and 300 0.7 and 21
0.7 and 21 100 and 3000 7 and 210
1.38 and 35 200 and 5000 1.38 and 350 (IGP20 only)
Process Connector Type (Material Same as Process Cover Material)
None; connect directly to process cover (not available with Structure Codes 78 and 79)
1/4 NPT (not available with Structure Codes 46. 47. 48. 49. 78. 79)
1/2 NPT (not available with Structure Codes 78. 79)
Rc 1/4 (not available with Structure Codes 46. 47. 48. 49. 78. 79)
Rc 1/2 (not available with Structure Codes 78. 79)
1/2 Schedule 80 Welding Neck (not available with Structure Codes 46. 47. 48. 49. 78. 79)
None; PVDF (Kynar) insert tapped for 1/2 NPT on side of 316 ss Process Cover (only with Codes 78/79)
Conduit Connection and Housing Material
1/2 NPT Conduit Connection, Aluminum Housing
PG 13.5 Conduit Connection, Aluminum Housing (With Electrical Safety Code D only)
1/2 NPT Conduit Connection, 316 ss Housing
PG 13.5 Conduit Connection, 316 ss Housing (With Electrical Safety Code D only)
M20 Conduit Connection, Both Sides, Aluminum Housing (With Electrical Safety Code D only)
M20 Conduit Connection, Both Sides, 316 ss Housing (With Electrical Safety Code D only)
Electrical Safety (See Electrical Safety Specifications Section for Description and ApprovalStatus)
ATEX flameproof; II 2 GD, EEx d IIC, Zone 1 (f) D
CSA Certifications: (g)
Division, 1 intrinsically safe, explosionproof, dust-ignitionproof
Zone certified Ex ia IIC, and energy limited Ex nA II
Division 2. Classes I, II, and III
C
CSA zone certified flameproof Ex d IIC. Also all certifications of Code C above. (f) B
FM Approvals: (g)
Division 1. intrinsically safe, explosionproof, dust-ignitionproof
Zone approved AEx ia IIC
Division 2. nonincendive, Classes I, II, and III
| NI | 161-0348-00 |
| NI | 192061B-02 |
| NI | CFP-AI-100 |
| NI | CFP-AI-111 |
| NI | CFP-AO-210 |
| NI | CFP-CB-1 |
| NI | CFP-DI-304 |
| NI | CFP-DO-400 |
| NI | CFP-DO-403 |
| NI | FP-TB-1 |
| NI | GPIB-140 |
| NI | GPIB-140A |
| NI | GPIB-140A 186135F-31 |
| NI | GPIB-140A 186135G-01 |
| NI | GPIB-140A 186135H-01L |
| NI | GPIB-140A/2 |
| NI | NI-9505 |
FM zone approved flameproof AEx d IIC. Also all approvals of Code F above. (f) G
IECEx flameproof, Ex d IIC, Zone 1 (f) V
Optional Selections
Refer to Optional Selection descriptions below.
Mounting Bracket Set – Not available with Direct Connect Seals, Structure Codes F1 and F2
Standard Style Painted Steel Bracket with Plated Steel Bolts
Standard Style Stainless Steel Bracket with Stainless Steel Bolts
Universal Style Stainless Steel Bracket with Stainless Steel Bolts-M1-M2-M3
Blind (Solid) Cover over Standard LCD Indicator
Blind (Solid) Cover replaces Window Cover
DIN 19213 Construction used with Process Connector Code 0 and 316 ss Process Covers Only (g)
Process Cover
Cover Screw Connector Screw
Type Material Size Material
Single Ended (h) Steel M10 (by User) N/A
Double Ended (h) (i) Steel M10 Steel
(Blind Kidney Flange on back)
Single Ended Steel 7/16 (by User) N/A
Double Ended (h) (i) Steel 7/16 Steel
(Blind Kidney Flange on back)
Single Ended (h) 316 ss 7/16 (by User) N/A
Double Ended (h) (i) 316 ss 7/16 316 ss
(Blind Kidney Flange on back)
Single Ended 17-4 ss 7/16 (by User) N/A
Double Ended (h) (i) 17-4 ss 7/16 17-4 ss
(Blind Kidney Flange on back)-D1-D2-D3-D4-D5-D6-D7-D8
Cleaning and Preparation – Not Available w/Gold-Plated Sensor, Structure 2G (g)
Unit Degreased – for Silicone Filled Sensors Only
(Not for Oxygen/Chlorine/Other Fluids that may react with Silicone)
Cleaned and Prepared for Oxygen Service – for Inert Filled Sensors Only
(Not available with Carbon Steel Covers or with Silicone Filled Sensors)
Cleaned and Prepared for Chlorine Service – for Inert Filled Sensors Only (j)
(Not available with Carbon Steel Covers or with Silicone Filled Sensors)-X1-X2-X3
Bolting for Process Covers/Connectors (k)
316 ss Bolts and Nuts (Pressure Derated) (h)
17-4 ss Bolts and Nuts (j)
B7M Bolts and Nuts (NACE)(Pressure Derated) (h)-B1-B2-B3
Conduit Thread Adapters
Hawke-Type 1/2 NPT Cable Gland for use with Conduit Connection Codes 1 and 3 (l)
M20 Connector for use with Conduit Connection Codes 1 and 3 (l)-A1-A3
Electronics Housing Features
External Zero Adjustment
Custody Transfer Lock and Seal
External Zero Adjustment and Custody Transfer Lock and Seal-Z1-Z2-Z3
Custom Factory Configuration
Full Factory Configuration (Requires Configuration Form to be filled out)-C2
Tubing Connectors – Specify Only One (Only 316 ss process covers; no side vents on cover) (g)
Steel, Connecting 6 mm Tubing to 1/4 NPT Process Connector
Steel, Connecting 12 mm Tubing to 1/2 NPT Process Connector
316 ss, Connecting 6 mm Tubing to 1/4 NPT Process Connector
316 ss, Connecting 12 mm Tubing to 1/2 NPT Process Connector-E1-E2-E3-E4
Gaskets
Gasket for Vacuum Service with Pressure Seals (m)-G1
Instruction Books (Common MI, Brochure, and Full Documentation Set on DVD is Standard)
Without Instruction Book and DVD – Only “Getting Started” Brochure is supplied