GE

GE MVDL800-47931001-A, 800A liquid-cooled Delta power module

The MVDL800 and MVDL1000 units are manufactured and remanufactured by Avid Controls Inc.

under a license agreement with the General Electric Company.

The MVDL800 and MVDL1000 are AC Inverter power modules for use inMV3000 variable speed

drive systems for the control of AC motors and other applications. They ared by an MV3000

Common Drive Controller (CDC).

Maximum current: 880A AC / 1100A AC

Operational Voltages

O Working AC Voltage: up to 690 V AC

O Maximum Nominal Internal Voltage: 1200 V DC

IGBT based Transistor Bridge Module

Liquid Cooled

Weight: 105kg (231 lb.)

WARNINGS & SAFETY INSTRUCTIONS

This equipment may be connected to more than one live circuit.

Wait at least 8 minutes after isolating supplies and check that the voItage between DC+ and DC- has

reduced to a safe level before working on the equipment.

Surfaces on the coolant pipes can reach high temperatures and remainhot for some time after power is

removed.

Ensure that all coolant has cooled to a safe temperature and the ecquipment is suitably drained and

isolated before the external pipework is disconnected from the equipment.

Unit is heavy: 105kg (231 lb.)

Care has been taken with the design of this product to ensure that it iss safe. However, in common with

all products of this type, misuse can result in injury or death. Thereforeis very important that the

instructions in this technical data sheet and the manual as well as on theduct are observed during

transportation, commissioning, operation, maintenance and dissposal.

This technical data sheet and the manual must be regarded as part of the pt should be stored

with the product and must be passed on to any subsequent owner or usser.

Local safety laws and regulations must always be observed.

Persons working on the product must be suitably skilled and should have been trained in that work for

these products.

The product is a component designed for incorporation in installations, aptus and machines.

The product must not be used as a single item safety system. In applicatios where mal-operation of

the product could cause danger, additional means must be used to prevvent danger to persons

Product approvals and certifications will be invalidated if the product isinsported, used or stored

outside its ratings or if the instructions in the manual are not observed.

In the European Union:

Products within the scope of the Low Voltage Directive, 2006/95/EC are CEmarked.

The product complies with the essential protection requiremesnts of the EMC directive

The requirements of the EMC Directive should be established before any installation, apparatus

or machine, which incorporates the product, is taken into servicee.

A machine must not be taken into service until the machine has beendeclared in conformity

with the provisions of the Machinery(Safety) Directive, 2006/42/EC.

3.

Disposal

This equipment or any part of the equipment should be disposed of in accorince with the laws of the

country of use.

Modern high technology materials have been used in the manufactuire of the equipment to ensure

optimum performance. Care has been taken with the selection of these materials to minimize risks to

health and safety. However, some materials require special consideration during the disposal.

In common with all products of this type, the high voltage eleectrolytic capacitors contain an

electrolyte, which must be disposed of as hazardous waste. The electrolyteare solutions of organic

and/or boric acid. The major solvents in the capacitors are butyrolaectone and ethylene glycol. The

electrolyte is non- carcinogenic, but may cause irritation to the skin if ontact is prolonged.

Liquid coolant is subject to special considerations during handling, storand disposal. Refer to the

manufacturer’s instructions.

Related Documents

This module is one component out of a range of components used forthe MV3000 drive system. This

data sheet gives details specifically for the items listed in section0 of this document.

For additional information on the installation, commissioning,operation, maintenance and

performance of the complete drive system, please refer to all MV3000 documincluding:

T1676EN, MV3000 Getting Started Manual for AC-fed Drives

T2002EN, MV3000 Getting Started Manual for Active Energy Management Irives

T1693EN, MV DELTA Liquid Cooled Drive System

T1679EN, MV3000 Drive Range Software Technical Manual

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注