FOXBORO AD202MV Pressure transmitter

The Compact HART Communication Output Interface Module (FBM215) contains eight channels of isolated output channels.

The Compact FBM215 supports any combination of standard 4 to 20 mA devices and HART devices,

and is part of the Compact 200 Series I/O Subsystem, as described in the Compact 200 Series I/O Subsystem Overview.

The Compact FBM215 serves as a host for HART-communicating field devices, allowing the Foxboro

Evo system to request and receive two digital telegrams per second from each field device.

The Telegram Pass-Through feature can be used to support HART generic, common,

and device-specific commands, but does not support burst communication modes.

Functional Features

Key features of the FBM233 include

– Redundant 10 Mbps or 100 Mbps Ethernet network transfer rates to and from field devices

– Communication with up to 64 field devices

– Downloadable I/O software drivers from available protocol libraries

– Up to 2000 DCI block connections

– Integration of field device data into the Foxboro DCS control database using an Ethernet connection

– Field Installation

– G3 rated (harsh) environments.

These commands are implemented through the Intelligent Field Device Configurator

(IFDC – see Intelligent Field Device Configurator FoxCom for details) and the HART protocol.

The compact FBM215 provides an isolated power supply for each channel.

When connected to the appropriate TA, the Compact FBM215 provides the

functionality previously provided by the 100 Series FBM I/O subsystem.

TAs support the functional HART devices of the 100 Series FBM37

when the FBM37 is used with the following devices

Liquid Crystal Display (LCD)

The FCP280 has a liquid crystal display (LCD) on the panel that displays

a variety of status and identification information, including

Status and identification information:

– The first line typically displays the letter number and role (Master/Shadow/Single) of the FCP280.

– The second line shows the FCP280’s part number, hardware revision information, date of manufacture,