Foxboro P0916DB I/A Series Module

Current Limit

Field power supplies used for contacts or solid state switches are current limited.

Terminal Assembly (TA)

Field I/O signals are connected to the FBM subsystem via DIN rail mounted TAs.

Visual indicators

Light-emitting diodes (LEDs) on the front of the module provide a visual indication

of the module’s operating status and the discrete status of each output point.

Features

Key features of the 200 Series Base Plate are listed below:

 for FBM-enabled baseplates:

– 2. 4. and 8 module positions combined with vertical and horizontal mounting

– Field connectable I/O termination assemblies, redundant adapters, and modules

Identifiers for each module

– DIP switches for identification of specific module backplanes

– Additional 200 series baseboards can be added without removing the

system from service (redundant bus required)

 supports FCP280/FCP270. FDC280. and FCM100Et baseboards:

– Connection for optional GPS time strobe.

All non-FDC280 module time strobe connections require a splitter/splitter.

direct connections are supported on the FDC280 baseboard.

 All baseboards are supported except the FDC280 baseboard (RH101KF):

– Connection to 2 Mbps modular fieldbus for standard fieldbus modules or 268 Kbps

fieldbus for 100 series FBMs

– Splitter/terminal modules for A/B fieldbuses

– Backwards compatible with existing I/O subsystems, allowing for future expansion

No additional interface hardware required

 Primary and secondary 24 VDC power supplies and communication connections

 Dedicated keying position for individual CP-type modules (e.g. FCP280. FDC280

or FCM/FBM),