Beckhoff CX5620-0162 CPU module
CX5620-0162 CPU module, Microsoft Windows 10 IoT Enterprise 2019 LTSC, 32 bit
CX5620 | Embedded PC with AMD Ryzen™ R1102G
The CX5620 is an Embedded PC based on the AMD Ryzen™ R1102G processor with a clock speed of 1.2 GHz (dual-core) and 4 GB DDR4-RAM.
The basic equipment includes two independent, 1.0 Gbit-capable Ethernet interfaces as well as four USB 3.0 and one DVI-D interface.
A replaceable, industry-standard M.2 SSD (SATA) is used as the boot and storage medium, enabling even faster read and write access and large-volume data handling.
The M.2 SSD is easily accessible behind a flap to enable rapid hardware replacement in case of service, even on site.
A wide range of additional connection options or gateway functions are available thanks to the optional interface and I/O level, which can consist of either E-bus or K-bus terminals and can be fitted ex factory.
C9900-B654 Specific BIOS with activated UPS OCT instead of standard BIOS.
This BIOS is only usable with a CU81xx UPS module.
CX2900-0110 Device modification for CX5330. CX5340. CX5620 and CX5630 Embedded PCs according to the requirements for ATEX, IECEx and FM certification.
The modification is mandatory for the usage of the devices in hazardous areas, Zone 2/22 or Class I, Division 2.
It includes the modification and repositioning of the device label as well as an assembly kit for a mounting bracket for mechanical locking of the connectors.
Read the device documentation for use in hazardous areas carefully.
Optional interfaces
CX5620-N010 DVI-D interface, additional DVI-D port for clone or extended display mode.
Is not supported by TwinCAT/BSD.
CX5620-N011 DisplayPort interface, additional DisplayPort for clone or extended display mode.
Is not supported by TwinCAT/BSD.
CX5620-N020 audio interface, 3 x 3.5 mm jack sockets, Line In, Mic In, Line Out or 5.1 Surround
CX5620-N030 RS232 interface, D-sub plug, 9-pin (RXD, TXD, RTS, CTS)
CX5620-N031 RS485 interface, D-sub socket, 9-pin, configuration as an end point, without echo, termination on
CX5620-N031-0001 RS485 interface, D-sub socket, 9-pin, configuration as an end point, with echo, termination on
CX5620-N031-0002 RS485 interface, D-sub socket, 9-pin, configuration as drop point, without echo, termination off
CX5620-N031-0003 RS485 interface, D-sub socket, 9-pin, configuration as drop point, with echo, termination off
CX5620-N031-0004 RS422 interface, D-sub socket, 9-pin, configuration as full duplex end point, termination on
CX5620-M112 2 x EtherCAT master interface
CX5620-B110 EtherCAT slave interface, EtherCAT IN and OUT (2 x RJ45)
CX5620-M310 PROFIBUS master interface, D-sub socket, 9-pin
CX5620-B310 PROFIBUS slave interface, D-sub socket, 9-pin
CX5620-M510 CANopen master interface, D-sub plug, 9-pin
CX5620-B510 CANopen slave interface, D-sub plug, 9-pin
CX5620-M930 PROFINET RT, controller interface, Ethernet (2 x RJ45 switch)
CX5620-B930 PROFINET RT, device interface, Ethernet (2 x RJ45 switched)
In addition, a system module or fieldbus module from the CX2000 series can be plugged in via the high-pole connection on the left-hand side of the device.
Although the total number of plug-in modules of the type CX2500-xxxx is limited to one with the CX5600 series, it is possible in this way, for example, to implement two further Gbit Ethernet interfaces or four further USB interfaces or a further fieldbus interface.
Furthermore, the CX5620 is characterized by an internally electrically isolated power supply unit, built-in 1-second UPS, low power consumption and fanless cooling.
The TwinCAT automation software turns the CX5620 system into a high-performance PLC and motion control system that can be used with or without visualization.
Both TwinCAT 2 in 32-bit mode and the latest TwinCAT 3 version in 64-bit mode are supported. Continuing support for TwinCAT 2 guarantees investment protection for projects and systems that were or will be created with this 32-bit generation.
The extended operating temperature range from -25°C to +60°C allows use in climatically demanding applications
Technical data CX5620
Processor AMD Ryzen™ R1102G, 1.2 GHz
Number of cores 2
Flash memory slot for M.2 SSD (SATA) and microSD card (storage media not included)
Main memory 4 GB DDR4 RAM
1-second UPS integrated (1 MB on M.2 SSD)
Interfaces 2 x RJ45 10/100/1000 Mbit/s, 1 x DVI-D, 4 x USB 3.0. 1 x optional interface
Cooling passive
Diagnostics LED 1 x power, 1 x TC status, 1 x flash access, 2 x bus status, 2 x user LED
Clock internal battery-backed clock for time and date (battery exchangeable)
Operating system Windows 10 IoT Enterprise 2019 LTSC, Windows 10 IoT Enterprise 2021 LTSC, Windows 11 IoT Enterprise 2024 LTSC, TwinCAT/BSD, Beckhoff RT Linux®
Control software TwinCAT 2 runtime
TwinCAT 3 runtime (XAR)
I/O connection E-bus or K-bus, automatic recognition
Power supply 24 V DC (-15%/+20%), electrically isolated
UPS OCT-capable yes
Max. power consumption 17 W
Max. power consumption (with loading UPS) 38 W
Max. power consumption E-bus/K-bus 10 W (5 V/max. 2 A)
Weight approx. 860 g
Dimensions (W x H x D) 124 mm x 100 mm x 92 mm
Relative humidity 95%, no condensation
Operating temperature -25…+60°C
Storage temperature -40…+85°C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4