SAUTER

SAUTER AVF 234S: SUT valve actuator with spring return

AVF 234S: SUT valve actuator with spring return

How energy efficiency is improved

Automatic adaptation to valve, precision activation and high energy efficiency with minimal operating

noise

Features

• Activation of 2-way and 3-way valves of the VQD/BQD, VQE/BQE, VUG/BUG, VUP, VUS/BUS and

V6R/B6R series.

For controllers with switching (2- and 3-point) and continuous output (0…10 V, 4…20 mA)

• Spring return moves to end position in the event of a power failure/interruption or when a limit con

troller is activated

• Stepping motor with SAUTER Universal Technology (SUT) electronic control unit and electronic,

force-dependent cut-off

• Simple assembly with valve; spindle is automatically connected after control voltage is applied (pa

tented system)

• Automatic detection of applied control signal (constant or switched); indicated by two LEDs

• Coding switches for selecting characteristic and running time

• Type of characteristic (linear/quadratic/equal-percentage) can be set on the actuator

• Automatic adaptation to the stroke of the valve (min. valve stroke 8 mm, max. valve stroke 49 mm).

The measured stroke is saved and is not lost even in the event of a power failure

• Direction of operation can be selected via screw terminals when making the electrical connection

• Crank handle for external manual adjustment with motor cut-off and as trigger for a re-initialisation

• Numerous adaptors enable the unit to be fitted onto non-SAUTER valves

• Power supply 230 V with module or direct connection for 24 V~ or 24 V=; continuous activation also

admissible with 230 V

•Maintenance-free gear unit made of sintered steel; gearbox base-plate made of steel

• Spring pack and mounting column made of stainless steel; mounting bracket made of cast light al

loy for valve fitting

• Electrical connections (max. 2.5 mm²) with screw terminals

• Three pre-scored cable inlets for M20 × 1.5 (2×) and M16 × 1.5

• Fitting vertically upright to horizontal, not suspended

Technical data

Power supply

Power supply 24 V~ ±20%, 50…60 Hz

Power supply 24 V= ±15%

Power supply 230 V~ ±15% (with accessories)

Power consumption1) 24 V~/24 V=

10 W, 20 VA

230 V~ (with accessories)

13 W/28 VA

Parameters

Running time of motor 2/4/6 s/mm

Running time of spring2) 15…30 s

Actuating power 2000 N

Response time for 3-point 200 ms

Number of spring returns > 40.000

Positioner Control signal 1 0…10 V, Ri = 100 kΩ

Control signal 2 4…20 mA, Ri = 50 Ω

Positional feedback 0…10 V 0…10 V; load > 2.5 kΩ

Starting point U0 0 V or 10 V

Control span ΔU 10 V

Switching range Xsh 300 mV

Ambient conditions

Admissible ambient temperature

Admissible ambient humidity

Temperature of medium3)–10…55 °C

< 95% rh, no condensation

Max. 130 °C (180 °C or 240 °C with

accessories)

Construction

Housing

Housing material

Two-part, yellow

Fire-retardant plastic

Standards and directives

Type of protection

Protection class

EMC Directive 2004/108/EC4)

Electrical safety 2006/95/EC

Over-voltage categories

Degree of contamination

IP66 (EN60529)

III (IEC 60730)

EN 61000-6-2. EN 61000-6-4

EN 60730-1. EN 60730-2-14

III

III

Overview of types

Type

AVF234SF132

Stroke

14…40 mm

AVF234SF132-5 14 mm

AVF234SF132-6 40 mm

AVF234SF232

Weight

5.6 kg

5.6 kg

Direction of operation of spring

Spindle retracted

Spindle retracted

6 kg

0…40 mm

5.6 kg

Spindle retracted

Spindle extended

A AVF234SF132: Valve normally closed (NC) with: VQD/BQD, VQE/BQE, VUG/BUG, BUS; valve normally

open (NO) with: VUS, VUP

A AVF234SF132-5. -6: Valve normally closed (NC) with: V6R, B6R

A AVF234SF232: Valve normally open (NO) with: VQD/BQD, VQE/BQE, VUG/BUG, BUS; valve normally

closed (NC) with: VUS, VUP

Accessories

Type

0313529001

Description

Split-range unit for adjusting sequences, fitted in separate junction box

Modules can be added for 2-point/3-point and continuous activation; additional power 2 VA

Type

0372332001

0372332002

Description

230 V ±15%, supply voltage

100 V ±15%, supply voltage

Auxiliary change-over contacts (2 each) 12…250 V~

Type

0372333001

0372333002

0372334001

0372334002

0372334006

0372336180

0372336240

Description

Infinitely variable, min. 100 mA and 12 V permissible load 6(2) A

Gold-plated contacts, from 1 mA, to max. 30 V, wider range 3(1) A

Potentiometer, 2000 Ω, 1 W; 24 V

Potentiometer, 130 Ω, 1 W; 24 V

Potentiometer, 1000 Ω, 1 W; 24 V

Adapter (required when temperature of the medium is 130…180 °C)

Adaptor (required when temperature of the medium is 180…200 °C)

Assembly kit for AVF234SF*32 on SAUTER valves (no adaptor needed for 0372338 002)

Type

0372338001

0372338002

0372338003

0372338004

Description

V/B6 to DN 50. V/BXD, V/BXE, to DN 50. stroke 14 mm

V/B6 DN 65…150. V/BXD, V/BXE from DN 65. stroke 40 mm

Conversion kit from AV*2*4SF132-5 to standard actuator AV*2*4SF132

Conversion kit from AV*2*4SF132-6 to standard actuator AV*2*4SF132

Adapter set for non-SAUTER valves

Type

0372376010

0372376014

Description

Siemens with 20 mm stroke or Ø 10 mm spindle

Siemens with 40 mm stroke or Ø 14 mm spindle

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注