SHINKAWA VM-722B 9-CHANNEL RELAY MODULE 

VM-722B 9-CHANNEL RELAY MODULE
OUTPUT
Indicators : ACTIVE LED (Green)
On         : Normal
Contact output  : Output at alarm detect.
Number of outputs : 9 points
Contact type : Dry contact (SPST)
Select for N.O. / N.C. contact by internal jumper.
Enagization method : Normally de-energized or
Normally energized field
changeable
Contact capacity : 250VAC/5A, 30VDC/5A
ENVIRONMENTAL CONDITION
Operating temperature  :  0 to +65°C
Operating temperature at explosion proof construction
:  0 to +60°C
Storage temperature  :  -30 to +85°C
Relative humidity  :  20 to 95%RH (non-condensing)
POWER CONSUMPTION
Module  : Less than 15W
MATERIAL AND FINISH
Face plate : ABS (Black)
Sheet : Polyester tough top (Gray)
Base plate : Alminium alloy (Silver)
MASS
Body : Max. 1.0kg (2.2lb)
ACCESSORY SPECIFICATION CODE / IDENTIFIED BY TB□
Code Accessory Quantity
(Part Code)
/TB1 Contact output terminal block plug (18pin)
FRONT-MC-1.5/18-STF-3.81 (PHOENIX CONTACT)
1piece *1
(7072NAA)
/TB2 Contact output terminal block plug (18pin)
FRONT-MC-1.5/18-STF-3.81 (PHOENIX CONTACT)
1piece *1
(7072NAA)
Note)*1  When individually ordering specify the parts code,it is require to arrange
for a necessary amount.
OTHERS
Note) This module can be installed in any slot from 1 to 11.
VM-772B Device Config is necessary to program the logic of output
contact.
CONTACT OUTPUT
Contact (RELAY1) : Slot 1 DANGER
Contact (RELAY2) : Slot 1 ALERT
Contact (RELAY3) : Slot 2 DANGER
Contact (RELAY4) : Slot 2 ALERT
Contact (RELAY5) : Slot 3 DANGER
Contact (RELAY6) : Slot 3 ALERT
Contact (RELAY7) : Slot 4 DANGER
Contact (RELAY8) : Slot 4 ALERT
Contact (RELAY9) : Slot 5 DANGER
CONTACT OUTPUT
Enagization method : Normally de-energized
Contact Type : N.O. (Normally Open) Contact

OTHERS
Contact type Enagization method Power OFF
Power ON
Normal state Alarm state
N.O. contact
NORMALLY DE-ENERGIZED OPEN OPEN CLOSE
NORMALLY ENERGIZED OPEN CLOSE OPEN
N.C. contact
NORMALLY DE-ENERGIZED CLOSE CLOSE OPEN
NORMALLY ENERGIZED CLOSE OPEN CLOSE