B&R X20cHB2885 Hub expansion module
X90 mobile
B&R continues to open up new possibilities in mobile automation with its innovative X90 mobile controllers.
The comprehensive set of standardized components is perfect for implementing flexible automation concepts. The heart of the X90 mobile control system is a powerful ARM processor and multifunction I/O channels.
Basic features include interfaces for CAN, Ethernet and the real-time POWERLINK bus system.
Discover our high-end embedded control solutions: The Automation PC 3100 mobile offers you CPU performance of up to 2.8 GHz in combination with our AR embedded operating system.
Ideal for demanding applications that require maximum performance.
X20HB2885 hub expansion module can be operated in these slots.
The active hub expansion module is equipped with one integrated 2x hub and allows redundant wiring. This
means that the connection between the two ports remains intact if there is a failure in the bus controller
or Compact Link Selector. The status of the module and network are indicated by LEDs.
• Active hub expansion module
• 2x Fast Ethernet hub for redundant wiring
• Hot-swap-capable
POWERLINK bus controller X20BC8083. standalone hub X20HB8880 and the POWERLINK TCP/IP gateway
X20HB8815 are equipped with a modular hub extension. 1 or 2 additional slots are available depending on
the bus base. The X20HB2880 hub expansion module can be operated in these slots.
The status of the module and network are indicated by LEDs.
• Hub expansion module
• 2x hub 100 BASE-TX
POWERLINK bus controllers X20BC8083 and X20BC8084 (starting with revision D0) and standalone hub
X20HB8880 are equipped with a modular hub extension. 1 or 2 additional slots are available depending on
the bus base. The X20HB1881 hub expansion module can be operated in these slots. It is important to note
that the hardware revision of the X20BC8083 and X20HB8880 must be ≥F0.
The hub expansion module is a 1x hub. The Ethernet connection is made using 62.5/125 μm or 50/125 µm
fiber optic multimode cable with a duplex LC connection. The module and network status is indicated using
LEDs.