Advantest BGD-022241 BA BOARD

Advantest BGD-022241 BA BOARD

Synchronization available up to 325 GHz

■ Resolution bandwidth (RBW):

10 Hz to 10 MHz, 5MHz (analog)

1 Hz to 100 Hz (digital)

■ Wide dynamic range:-145dBc/Hz (2GHz band, typ.)

70dB or better for W-CDMA ACP measurement  (5MHz offset, typ.)

■ 1µs fast zero-span sweep

■ Simplified, Automated measurements for mobile communications

■ Digital modulation analysis options for 1G, 2G, and 3rd

Remove dust from the exterior of the R3267 by wiping or brushing the surface with a soft cloth or small brush.

Use a brush to remove dirt from around the panel keys. Hardened dirt can be removed with

a cloth that has been soaked in water containing a mild detergent.

Normally, cleaning the display filter from the front is sufficient. However, if the inside of the filter or the LCD surface is dirty,

you can detach the screen filter from the R3267 series by removing the two screws on the front and pulling

forward on the right part of the filter. Clean the filter with a soft close.

CMOS Image Sensor Test Solution

We provide a test solution that minimizes test cost by flexibly supporting measurement of the newest CMOS image sensors with leading-edge high-speed interfaces.

Flexible Support for Multifunctional Image Sensors

CMOS image sensors have a variety of built-in functions including AD/DA and logic circuits.

By combining measurement modules according to the functions required for testing specific image sensors, the T2000 achieves a scalable system configuration.

High speed Image Capture up to 4.8Gbps

The T2000 image sensor test solution can capture the image output from CMOS image sensors utilized in applications including smartphones, security cameras, and automotive/industrial cameras.

Its dual bank memory configuration minimizes test time by storing data and transferring it to the IP engine at the same time.