OMRON NB10W-TW01B INTERACTIVE DISPLAY
OMRON NB10W-TW01B INTERACTIVE DISPLAY
Touch screen HMI, 10.1 inch WVGA (800 x 480 pixel), TFT color, Ethernet + USB Host
Specifications
Screen diagonal 10.1 in
Number of pixels, horizontal 800
Number of pixels, vertical 480
Type of display TFT
Frame color Black
Number of Ethernet ports 1
Number of USB ports 2
Number of RS-232 ports 2
Number of RS-422 ports 1
Number of RS-485 ports 1
Number of colors of the display 65536
Number of grey-scales/blue-scales of display 64
Degree of protection (IP), front side IP65
Width of the front 268.8 mm
Height of the front 210.8 mm
Width of panel cutout 258 mm
Height of panel cutout 200 mm
Built-in depth 54 mm
Product Weight (unpacked) 1950 g
Heater Burnout Alarms and SSR Failure
NB10W-TW01B
Alarms
CT input (for heater
current detection)
Models with detection for single-phase
heaters: One input
Maximum heater current 50 A AC
Input current
indication accuracy
CompoWay/F, or Modbus
Baud rate *
Transmission code
9.600. 19.200. 38.400. or 57.600 bps
ASCII
Heater burnout alarm
setting range *1
±5% FS ±1 digit max.
0.1 to 49.9 A (in units of 0.1 A)
Minimum detection ON time: 100 ms *3
0.1 to 49.9 A (in units of 0.1 A)
SSR failure alarm setting
range *2
Data bit length *
Stop bit length *
Error detection
Flow control
Interface
Retry function
7 or 8 bits
1 or 2 bits
Vertical parity (none, even, odd)
Block check character (BCC)
with CompoWay/F or
CRC-16 with Modbus
None
RS-485
| 330104-06-12-10-02-00 Bently Nevada Proximity Probes |
| MPM-B1304M-MJ72AA Allen-Bradley permanent magnet rotary medium inertia motor |
| 3HAC044516-001/00 ABB AC Motor with encoder interface |
| IC695ETM001-JY GE PACSystem Rx31 module |
| 2711P-T10C21D8S PanelView Plus 7 Standard Terminals Allen Bradley |
| SPTU240R2 ABB POWER SUPPLY Certification Level 1 |
| G123-815V001 BUFFER AMPLIFIER MOOG |
| 2715P-T7CD Allen-Bradley DC-powered operator interface terminal |
| IC693ACC350 GE redundant power supply adapter module |
| 1761-L32BWA/E Allen Bradley Programmable controller manufactured |
| 1769-PA4/A AC Power Supply Module Allen Bradley |
| 3HAC025097-016 Fan ABB |
| 1769-IF16V Allen-Bradley 16 Point Analog Voltage Input Module |
| 9905-463 CHANNEL RELAY WOODWARD |
| 5AP923.1215-00 Automation Panel 21.5 B&R |
| RLX2-IHNF-WC Prosoft Fast Industrial Hotspot |
| A06B-0117-B855#0049 FANUC J5/J6 MOTOR BRAKE |
Minimum detection OFF time: 100 ms *4
*1.For heater burnout alarms, the heater current will be measured
when the control output is ON, and the output will turn ON if the
heater current is lower than the set value (i.e., heater burnout
detection current value).
*2.For SSR failure alarms, the heater current will be measured when
the control output is OFF, and the output will turn ON if the heater
current is higher than the set value (i.e., SSR failure detection
current value).
*3.The value is 30 ms for a control period of 0.1 s or 0.2 s.
*4.The value is 35 ms for a control period of 0.1 s or 0.2 s.
Communications buffer
Communications
response wait time
217 bytes
0 to 99 ms
Default: 20 ms
*The baud rate, data bit length, stop bit length, and vertical parity can
be individually set using the Communications Setting Level.
Communications Functions
Programless
communica
tions *1
You can use the memory in the PLC to read and write
E5@C parameters, start and stop operation, etc.
The E5@C automatically performs communications with
PLCs. No communications programming is required.
Number of connected Digital Temperature
Controllers: 32 max. (Up to 16 for the FX Series)
Applicable PLCs
OMRON PLCs
CS Series, CJ Series, CP
Series, NJ Series, or NX1P
Mitsubishi Electric PLCs MELSEC Q Series, L Series,
FX3 Series, or iQ-R Series
KEYENCE PLCs
KEYENCE KV Series
Electrical Life Expectancy Curve for
Control Output Relay (Reference Values)