Applied Materials (AMAT) 0110-77040 | Head Pneumatic Controller
Applied Materials (AMAT) 0110-77040 | Head Pneumatic Controller
The AMAT 0110-77040 is a specialized Head Pneumatic Controller module primarily used within the Titan series of wafer polishing heads.
As an integral component of Chemical Mechanical Planarization (CMP) systems, this controller manages the delicate pneumatic pressures required to ensure uniform material removal across the surface of a semiconductor wafer.
Technical Parameter Table
| Parameter | Specification |
| Manufacturer | Applied Materials (AMAT) |
| Part Number | 0110-77040 |
| Common Name | ASSY, Head Pneumatic Controller (Titan) |
| Application | CMP (Chemical Mechanical Planarization) |
| Input Type | Digital Logic & Analog Pressure Feedback |
| Control Interface | Integrated PCB with Solenoid Driver Circuits |
| Operating Medium | Clean Dry Air (CDA) / Nitrogen ($N_2$) |
| Compatibility | Mirra, Mirra Mesa, and Reflection Platforms |
Related Models
The 0110-77040 often works in conjunction with or is categorized alongside these components:
0100-77040: The PCB-specific designation often found within the assembly.
0190-01740: Related power or signal distribution components.
0010-series: Various Titan head assemblies that utilize this specific pneumatic logic.
Application Cases
Titan Head Pressure Control: Regulating the retaining ring and membrane pressures during the polishing cycle to achieve sub-nanometer flatness.
Wafer Loading/Unloading: Controlling the vacuum and pressure transitions used to pick up and release wafers from the polishing pad.
Zone Pressurization: Managing multi-zone pressure profiles to compensate for “edge effect” during the slurry-based polishing process.
Product Advantages and Features
Precision Regulation: Specifically tuned for the fast-response times required in high-throughput CMP environments.
Closed-Loop Feedback: Interfaces directly with pressure sensors to maintain stable setpoints despite fluctuation in facility air supply.
Modular Architecture: Designed as a field-replaceable unit (FRU) to allow for quick restoration of tool “Up-Time” during pneumatic failures.
High Durability: Built to withstand the humid, chemically active environment of a CMP sub-fab or tool cabinet.
Other Models in the Same Series
Applied Materials uses specific “Head Controller” variants based on the generation of the polishing system:
0110-00946: Legacy Controller Board for P5000 systems.
0110-01142: Advanced Signal Logic Board.
0110-77064: High-speed I/O variant for newer Reflection platforms.
GE 8521-LC-MT Managed Layer 2+ Ethernet Switch with Multi-Gigabit Uplinks
WOODWARD 8440-1843 Electronic Engine Control Unit (ECU)
GE VMIVME-7807RC (PMC676RCTX) VMIC / VMIVME Rugged Computer Board
ABB RET670 Verison 2.2 Transformer Protection Relay / Bay Controller
GE IS220PTURH1A Turbine Speed Sensor (Magnetic Pickup) Input Module
GE IS220PTCCH1A PTC Thermistor Input Module
GE IS230PCAAH1A Power Supply Module
GE IS200TCASH1A Thermocouple Input Terminal Board
GE IS200TREGH1B Terminal Board for Turbine Control I/O Module
GE IS410JPDHG1A Profibus DP-V1 Communication Module
GE IS230TRLSH2B Terminal Reset Module
HONEYWELL FS-FEEDER-24R Feeder Module for Fire Alarm Control Panel (FACP) Power Supply
GE IC697CPM914 Main Central Processing Unit (CPU) Module
KONGSBERG RMP420 306712 Remote Multiplexer / Remote I/O Unit (RIU)
METSO IOP331 Intelligent Multivariable Pressure Transmitter (DP Flow)
METSO IOP302 Intelligent Digital Pressure Transmitter
METSO PDP403-C High-Performance Intelligent Pressure Transmitter
YOKOGAWA CP471-00 S1 I/O Unit for Distributed Control System (DCS) I/O Module
BENTLY 1900/65A-01-01-03-01-00 Proximity Transducer System (PTS)
ICS T8451 / T8451C Triple Modular Redundant (TMR) Safety System
GE DS200CDBAG1B Control Board / I/O Board for Mark VIe Turbine Control System
KOLLMORGEN E33NCHA-LNN-NS-00 ntegrated Servo Motor
HIMA F3DIO 16/801 Digital Input/Output Module for Safety Systems
GE F650BFBF2G0HIE Digital Feeder Protection Relay (Bay Controller)
GE F650BFBF1G0HI Feeder Protection Relay / Bay Controller
AMAT 0190-13025
Installation and Maintenance
Installation: 1. Power down the CMP tool and lockout/tagout (LOTO) all pneumatic lines.
2. Ensure the 0110-77040 is seated properly in the controller rack or head assembly.
3. Verify that all pneumatic tubing connections are leak-free using specialized leak detection equipment.
Maintenance: 1. Periodically check for moisture or oil contamination within the pneumatic lines, which can degrade the controller’s solenoid valves.
2. Use a digital manometer to verify that the analog output matches the physical pressure delivered to the Titan head.
3. Standard ESD protocols must be followed whenever handling the PCB components of this assembly.
Unique Product Description
The AMAT 0110-77040 is more than just a circuit board; it is the “air traffic controller” for the Titan polishing head.
In the world of semiconductor manufacturing, the difference between a functional chip and a defect often comes down to a few PSI of pressure.
This controller ensures that the pneumatic forces applied to the wafer are perfectly balanced, making it a cornerstone for maintaining high yields in 200mm and 300mm fabrication facilities.