Vibro-Meter ABE046 – 6U 19-inch rack
ABE046 - 6U 19-inch rack
1Global DIAG/STATUS indicator LED for the card
This multi-function, multi-colour LED is used for the fol...
Blog
Vibro-Meter ABE045 – 6U 19-inch rack
ABE045 - 6U 19-inch rack
In practice, it can take up to 350ms (“confirmation time” + “response time”) after an input
signal goes ...
Vibro-Meter ABE044 – 6U 19-inch rack (with expansion slots)
ABE044 - 6U 19-inch rack (with expansion slots)
Channel inhibit function
The channel inhibit function allows individual AMC8 chan...
Vibro-Meter ABE042 6U 19-inch rack (4 slots)
ABE042 6U 19-inch rack (4 slots)
Logical combinations of alarms
The MPS allows logical combinations of alarms to be configured u...
I/O interface card XIO16T Vibro-Meter
I/O interface card XIO16T
Sensor signal conditioning
This block (see Figure5-2) acts as a signal interface and is used to:
• ...
Vibro-Meter XMC16 16-channel combustion monitoring card
XMC16 16-channel combustion monitoring card
Sensor signal conditioning
This block (see Figure5-2) acts as a signal interface and ...
Vibro-Meter XMV16 – 16-channel vibration condition monitoring card
Vibro-Meter XMV16 - 16-channel vibration condition monitoring card
General block diagram
A block diagram of the AMC8. IOC8T, RLC1...
MOOG B95863-001 CAN Connection Cables
In 914-EX cards with FPGA Firmware 0xB0 or greater, the “Remote Ethernet Link Speed Synchronization” (RLSS)
feature is enabled by de...
MOOG CA65865-001 MSCl Motion Controller
An important consideration for module placement is electromagnetic interference (EMI) from other equipment in the enclosure.
For exa...
MOOG D136-003-002 Interfaces of Ruggedized Motion Controller
MOOG D136-003-002 Interfaces of Ruggedized Motion Controller
An important consideration for module placement is electromagnetic inte...