KEBA

KEBA CU313A Large-Scale Complex Control Module

The BL 210/B (CANopen) and the BL 27x/x series are bus coupler modules that, in combination with I/O modules,

enable the decentralization and transmission from module islands.

The BL 27x/x series is used as a bus coupler between EtherCAT and K-bus. Modules of the system can thereby be ope

rated as remote I/O islands. The BL 27x/x can be connected to a control via EtherCAT and is thereby made an EtherCAT

slave. Two variants of the BL27x series are available:- With four additional digital inputs

(BL 27x/A)- With four additional digital outputs (BL 27x/B)

As a special feature, the BL 272/x enables the connection of interface modules for fieldbuses (FM 200/A) and serial in

terfaces (SM 210/A, SM 220/A, SM 230/A). This enables the operation of such interfaces remotely from CPU modules.

This feature is also referred to as “bus via bus communication”.

The status of the module is indicated via a status LED. The LEDs on the RJ45 sockets provide information about the

link and activity status of the respective network connection. Each digital input/output also has a status display (active/

not active).

XP POWER F8B6D4A3G3
XYCOM PROTO XVME-085
XYCOM XVME-530
XYCOM XVME-674
XYCOM XVME-957
XYCOM XVME-976
YAMAHA RCX40
YAMATAKE EST0240Z05WBX00
YAMATAKE HD-CAOBS00
YASKAWA 218IF
YASKAWA AI-01
YASKAWA CACR-02-TE1K
YASKAWA CACR-HR10BB
YASKAWA CACR-SR07BE12M
YASKAWA CIMR-M5D2018
YASKAWA CP-317/217IF
YASKAWA CP-317/218IF
YASKAWA CP-317/AI-01

These modules are attached directly to a CPU module or can be operated with all KEBA controls by means of bus

couplers.

SM 210/A and SM 230/A are serial interface modules and enable the connection of two RS 232-C or RS 422/485-A

serial interfaces. The two communication channels function independent of one another in full-duplex operation.

SM 220/A is a serial interface card. This module enables the connection of a serial 20 mA Current Loop interface. The

interface functions both for the transmitter as well as for the receiver in active or passive operation. DIP switches are

provided on the front for switching the operating mode. At a maximum transmission rate of 9.6 kbits/s, a line length of

up to 1.000 m is possible.

Alstom ESH-700-VL-FO Limelight Exacta Flame Scanner Sensor 22v-dc

Alstom MVAX11J1DA0751A Auxiliary Tripping Relay Supervises Trip Circuit Breaker

Alstom 029.202 426 A/D-D/A-Converter 8 I/O 10V | ADA 232 | Rev:06

ALSTOM PCO214 REV 1 CARD

Alstom Controller SIR4 85kv/1200 V0701624-201101 Untested (clean)

Alstom Alspa Breakout Fuse Board 1SNL491237R0100 Plat Surville Fusible AIT016

Alstom Signaling Wayside Product Type B Series Relay

Alstom Signaling 30800-007-01 Receiver Assembly. Train Rail Transit

ABB Alstom HTGR102976R0001 Spring Loaded Over Pressure Safety Check Valve

CONVERTEAM 70SI01 / 70SI01

CONVERTEAM 3D8FP1012A / 3D8FP1012A

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注