KEBA

KEBA CU312/E Customized Controller

Analog input module KeConnect AI 240/A features four analog voltage inputs that process differential or ratiometric input

signals in the range from ±10 V or 0-10 V with a resolution of 14 bit.

A sensor failure, should it occur, is reported to the higher-level central module and can be evaluated in the application.

This module is attached directly to a CPU module or can be operated with all KEBA controls by means of a bus coupler.

Two variants of the BL27x series are available:- With four additional

digital inputs (BL 27x/A)- With four additional digital outputs (BL 27x/B)

The BL 210/B (CANopen) and the BL 27x/x series are bus coupler modules that,

in combination with I/O modules,

enable the decentralization and transmission from module islands.

Digital inputs (only BL 27x/A)

Number / type of inputs 4x type 1 (acc. to EN 61131-2)

Voltage range for “1” 15 V ≤ UH ≤ 30 V

Voltage range for “0”-3 V ≤ UL ≤ 5 V

Status display Green LED

Cycle time 1 ms

Usable as interrupt inputs Yes

Response time of the K-bus interrupt 100 μs with 5 kHz input filter

Galvanic isolation No

Debouncing Configurable 1 ms, 100 ms

Digital outputs (only BL 27x/B)

Number of outputs 4

Nominal voltage 24 V DC

Processing time 1 ms

Nominal current of digital outputs 0.5 A at 100  % simultaneity per group

Galvanic isolation No

WESTINGHOUSE 1C31132G02
WESTINGHOUSE 1C31147G01
WESTINGHOUSE 1C31150G01
WESTINGHOUSE 1C31161G02
WESTINGHOUSE 1C31164G02
WESTINGHOUSE 1C31179G01
WESTINGHOUSE 1C31179G02
WESTINGHOUSE 1C31189G01
WESTINGHOUSE 1C31194G01
WESTINGHOUSE 1C31194G02
WESTINGHOUSE 1C31194G03
WESTINGHOUSE 1C31197G01

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注