KEBA IM 270/W 090758 / IM270/W
Dimensions, weight
Height 120 mm
Width 22.5 mm front plate / 32.5 mm incl. K-bus plug
Depth 100 mm
Weight 135 g
Environmental conditions
Operating temperature +5 °C … +55 °C
Storage temperature-40 °C … +70 °C
Relative air humidity 10 % to 95 % (non-condensing)
Vibration resistance / shock resistance Acc. to EN 61131-2
General
Supply voltage 24 V DC from K-bus, 5 V DC from K-bus
Overvoltage category II
Protection class III acc. to EN 61131-2
Addressing on K-bus Via 16-digit address switch, on the side
Type of terminals Open – pitch 5.08 mm
Power consumption K-bus 24 V 2 W
Power consumption K-bus 5 V 0.3 W
Product features
• 4 analog voltage outputs
• Resolution 12 bit
• Electronic parameter chip
Short description
KeConnect AO 240/A is an analog voltage output module. The outputs produce signals in the range of ±10 V with a
resolution of 12 bit.
This module is attached directly to a CPU module or can be operated with all KEBA controls by means of a bus coupler.
Analog outputs
Number / type of outputs 4 voltage outputs
Resolution 12 bit
| REXROTH | BGR DKC02.3-LK SCK02/01 |
| REXROTH | BTV04.2GN-FW |
| REXROTH | CSB01.1N-AN-ENS-NNN-NN-S-NN-FW |
| REXROTH | CSH01.1C-SE-EN2-NNN-NNN-NN-S-XP-FW |
| REXROTH | DDS2.1W200-D |
| Rexroth | DKC01.3-012-3-MGP-01VRS |
| REXROTH | DKC02.3-200-7-FW |
| REXROTH | DKC03.3-040-7-FW |
| REXROTH | DKC10.3-018-3-MGP-01VRS |
| REXROTH | HNC100-NIB-23/W-24-P-D-E23-A012 |
| REXROTH | HVE04.2-W075N |
| REXROTH | MDD112D-N030-N2M-130GA0 |
Signal range ±10 V
Galvanic isolation No
Conversion cycle 1 ms
Value of the lowest bit (LSB) 5.32 mV
Monotonicity Yes
Load resistance ≥ 1000 Ω
Largest capacitive load ≤ 10 nF
Differential non-linearity ≤±1 LSB
Settling time when changing over the full range
(with ohmic load) ≤ 50 μs
Typ. temp. coefficient analog output error ±20 ppm of scale end value / °C
Max. temp. coefficient analog output error ±30 ppm of scale end value / °C
Largest error at 25 °C ±0.15 % of scale end value
Dimensions, weight
Height 120 mm
Width 22.5 mm front plate / 32.5 mm incl. K-bus plug
Depth 100 mm
Weight 135 g
Environmental conditions
Operating temperature +5 °C … +55 °C
Storage temperature-40 °C … +70 °C
Relative air humidity 10 % to 95 % (non-condensing)
Vibration resistance / shock resistance Acc. to EN 61131-2
General
Supply voltage 24 V DC from K-bus, 5 V DC from K-bus
Overvoltage category II
Protection class III acc. to EN 61131-2
Addressing on K-bus Via 16-digit address switch, on the side
Type of terminals Open – pitch 5.08 mm
Power consumption K-bus 24 V 1.9 W
Power consumption K-bus 5 V 0.3 W