FOXBORO

FOXBORO P0911QH-A – Generic industrial module

Process Wetted Materials

PROCESS CONNECTION

316L ss or Nickel alloy

SENSOR DIAPHRAGM

316L ss, Nickel alloy, or Co-Ni-C

Pressure Seal Diaphragm Material

Varies with pressure seal selected.

See PSS 2A-1Z11 A.

Reference (Atmospheric Pressure) Side

Materials

IAP10

Not applicable

IGP10 WITH SPAN CODES C AND D

Silicon, Pyrex, RTV, and 316 ss

IGP10 WITH SPAN CODES E AND F

Not applicable

Fill Fluid

Silicone Oil or Inert FC43. as specified.

Dimensions

Refer to “DIMENSIONS – NOMINAL” on page 36

and to Dimensional Print DP 020-447.

Approximate Mass

With Aluminum Housing:1.5 kg (3.3 lb)

With 316 ss Housing: Add 1.1 kg (2.4 lb)

With Pressure Seals: See PSS 2A-1Z11 A

Accessories

IAP10 and IGP10 Transmitters can be provided with

integral connections for both sanitary, and pulp and

paper processes. With these applications, numerous

accessories are offered, including tank spuds, weld

spuds, heat sinks/plugs, calibration adapters, Tri

clamps, and O-rings (or gaskets). Refer to

PSS 2A-1C13 K (Sanitary Processes) and

PSS 2A-1C13 L (Pulp and Paper Processes) for

complete specifications.

1/2 NPT Conduit Connection, Aluminum Housing 1

PG 13.5 Conduit Connection, Aluminum Housing (With Electrical Safety Code D only) 2

1/2 NPT Conduit Connection, 316 ss Housing 3

PG 13.5 Conduit Connection, 316 ss Housing (With Electrical Safety Code D only) 4

M20 Conduit Connection, Both Sides, Aluminum Housing (with Electrical Safety Code D only) 5

M20 Conduit Connection, Both Sides, 316 ss Housing (with Electrical Safety Code D only) 6

Electrical Safety (See Electrical Safety Specifications Section for Description and ApprovalStatus)

Electrical Safety (See Electrical Safety Specifications Section)

ATEX flameproof; II 2 GD, EEx d IIC, Zone 1 (g) (h) D

CSA Certifications: (i)

Division, 1 intrinsically safe, explosionproof, dust-ignitionproof

Zone certified Ex ia IIC, and energy limited Ex nA II

Division 2. Classes I, II, and III

MOTOROLA MVME2434
MOTOROLA MVME2604-4351
MOTOROLA MVME2604761
MOTOROLA MVME300
MOTOROLA MVME3100
MOTOROLA MVME333-2
MOTOROLA MVME335
MOTOROLA MVME374
MOTOROLA MVME5100
MOTOROLA MVME51005E-0163
MOTOROLA MVME5101-0131
MOTOROLA MVME5110
MOTOROLA MVME5500

CSA zone certified flameproof Ex d IIC. Also all certifications of Code C above. (g) (h) B

FM Approvals: (i)

Division 1. intrinsically safe, explosionproof, dust-ignitionproof

Zone approved AEx ia IIC

Division 2. nonincendive, Classes I, II, and III

F

FM zone approved flameproof AEx d IIC. Also all approvals of Code F above. (g) (h) G

IECEx flameproof, Ex d IIC, Zone 1 (g) (h) V

Optional Selections See descriptions below.

Mounting Bracket Set (j)

Painted Steel Bracket with Plated Steel Bolts, 1/2 NPT (with Conduit Connection Codes 1 and 3 only)-M1

Stainless Steel Bracket with Stainless Steel Bolts, 1/2 NPT (with Conduit Connection Codes 1 and 3 only)-M2

Painted Steel Bracket with Plated Steel Bolts, PG 13.5 (with Conduit Connection Codes 2 and 4 only)-M3

Stainless Steel Bracket with Stainless Steel Bolts, PG 13.5 (with Conduit Connection Codes 2 and 4 only)-M4

Painted Steel Bracket with Plated Steel Bolts, M20 (with Conduit Connection Codes 5 and 6 only)-M5

Stainless Steel Bracket with Stainless Steel Bolts, M20 (with Conduit Connection Codes 5 and 6 only)-M6

Blind (Solid) Cover over Standard LCD Indicator

Blind (Solid) Cover replaces Window Cover-L2

Vent Screw and Block & Bleed Valve

316 ss Vent Screw in Process Connection (Not with Structure Codes 32 or 33. or Pressure Seals)-V1

Block and Bleed Valve, Carbon Steel (Not with Pressure Seals)-V2

Block and Bleed Valve, 316 ss (Not with Pressure Seals)-V3

Block and Bleed Valve, 316 ss w/Monel Trim (Not with Pressure Seals)-V4

Conduit Thread Adapters

Hawke-Type 1/2 NPT Cable Gland for use with Conduit Connection Codes 1 and 3 only (k)-A1

M20 Connector for use with Conduit Connection Codes 1 and 3 only (k)-A3

Electronic Housing Features

External Zero Adjustment-Z1

Custody Transfer Lock and Seal-Z2

External Zero Adjustment and Custody Transfer Lock and Seal-Z3

Custom Factory Configuration

Full Factory Configuration (Requires Configuration Form to be filled out)

发表回复

您的邮箱地址不会被公开。 必填项已用 * 标注