Beckhoff CX2500-1061 | Power over Ethernet module for CX20xx, CX52x0. CX53x0. CX56x0

CX2500-1061 | Power over Ethernet module for CX20xx, CX52x0. CX53x0. CX56x0

The system modules are connected to the CPU on the left-hand side via a multi-pin connector. Internally they are connected via PCI Express®.

For the CX20xx family, up to four modules can be connected in any order. One module can be connected to CX52x0. CX53x0 or CX56x0.

The CX2500-1061 Power over Ethernet module supports devices with PoE class 0. 1. 2. 3 and 4 in accordance with the PoE standard IEEE 802.3af-2003.

The maximum PoE power output is 15.4 W. The PoE supply voltage is generated internally, no external power supply is necessary.

In the case of an overload of the CX2500-1061. the PoE supply shuts down for two seconds, then restarts.

The diagnostic LEDs PWR, PoE, PM1 and PM2 provide information about the type of PoE supply (mode A or B) as well as about the PoE class reported by the powered device.

Technical data    CX2500-1061

Interfaces    1 x Ethernet

Chipset    Intel® Ethernet controller I210

Transmission rate    10/100/1000 Mbit/s with Power over Ethernet (PoE)

Connection type    1 x RJ45

Power supply    via system bus (through CX2100-0xxx power supply modules)

Dimensions (W x H x D)    24 mm x 99 mm x 54.5 mm

Weight    approx. 208 g

Operating temperature    -25…+60°C

Storage temperature    -40…+85°C

Relative humidity    95%, no condensation

Vibration/shock resistance    conforms to EN 60068-2-6/EN 60068-2-27

EMC immunity/emission    conforms to EN 61000-6-2/EN 61000-6-4

Protection rating    IP20