DEIF iE 650 PLC Extreme robust Programmable Automation controller with EtherCAT based I/O
iE 650 PLC
Extreme robust Programmable Automation controller with EtherCAT based I/O
The iE 650 PLC is our high-end offering for tomorrow’s intelligent energy solutions requiring high reliability in demanding climatic conditions experienced on land, marine or container-based turn-key solutions.
The iE 650 PLC is a PLC-based programmable automation controller (PAC) suitable for land, marine, and wind power control
applications. It is class approved, designed to marine specifications and can withstand very harsh operating conditions.
The controller is a highly flexible, modular PLC and I/O system that is designed for usage across a wide range of industrial
applications. It is reliable, robust and flexible.
EtherCAT is used as native communication protocol both as the backplane communication and as interconnection between
multiple iE 650 PLC racks via electrical or fibre optical connections. Other DEIF EtherCAT I/O modules or third party
EtherCAT I/O modules can also be connected
Software versions
The information in this document relates to software versions:
Software
iE PLC bundle
BSP
CODESYS CONTROL
CODESYS IDE
CODESYS TSP
Details
Signed Software bundle with components:
Board Support Package (Operating System)
CODESYS Control run-time
Version
2.0.17.1
5.0.9.1
3.5.22.10
PC software for development of CODESYS applications
iE x50 CODESYS TSP (Target Support Package)
Environment
Category Specification Standard
Operating temperature -40 to 70 °C
IEC 60068-2-1
IEC 60068-2-2 Storage temperature -40 to 85 °C
Reference temperaure 15 to 30 °C
Altitude Up-to 4000 m without de-rating (for deployment above 4000 m, contact
Product Management).
Climate
All modules are conformal coated, hence protected against moisture, mold,
dust, corrosion and other environmental stresses.
IEC
60068-2-30
test Db 55 °C at 97 % relative humidity, condensing
Dry heat test IEC 60068-2-2
Cold test IEC 60068-2-1
Tests
Category Specification Standard
Performance test and
performance check Criteria/standard: All inputs, outputs and interfaces are functional.
Radiated E-field emission
• 30 to 230 MHz: 50 dB (μV/m) Qp 10 m
• 230 to 1.000 MHz: 57 dB (μV/m) Qp 10 m
• 1 to 3 GHz: 76 dB (μV/m) Q peak 3 m
• 1 to 3 GHz: 56 dB (μV/m) average 3 m
• 3 to 6 GHz: 80 dB (μV/m) Q peak 3 m
• 3 to 6 GHz: 60 dB (μV/m) average 3m
IEC 61000-6-4
IEC 60255-26
Conducted emission IEC 61000-6-4
IEC 60255-26
Electrical fast transients test
(EFT) Criteria B
Levels extended to:
• DC-power port: ±4 kV
• Functional Earth port: ±4 kV
• Signal input and output ports: ±2 kV
• Communication ports: ±2 kV
• Repetition frequencies: 5 KHz and 100 KHz
• Duration each polarity: 1 min.
EN 61000-4-4
EN 61000-6-2
RF E-Field immunity Criteria: A 80 to 2.000 MHz: 12 V/m
2 to 3 GHz: 10 V/m
EN 61000-4-3
EN 61000-6-2
Electrostatic discharge
(ESD) Criteria: B Level extended to: Contact 6 kV EN 61000-4-2
EN 61000-6-2
Slow transients test, surge Criteria: B
Levels extended to:
• Digital inputs: ±1 kVp DM and ±2 kVp CM
• Digital outputs: ±1 kVp DM and ±2 kVp CM
• Analogue inputs: ±3 kVp DM and ±3 kVp CM
• Analogue outputs: ±1 kVp DM and ±2 kVp CM
• Temperature inputs: ±3 kVp DM and ±3 kVp CM
• Main power supply: ±3 kVp DM and ±3 kVp CM
• Dig output power supply: ±3 kVp DM and ±3 kVp CM
EN 61000-4-5
EN 61000-6-2