SAUTER AKM115SF132  Rotating Actuator  AKM 105S/115S Series

SAUTER  AKM115SF132  Rotating Actuator  AKM 105S/115S Series

Features

For operating 2- and 3-way ball valves VKR, VKRA, BKR, BKRA, VKAI, VKAA, BKLI, BKTI, BKTA, (AKM115S) and 6-way ball valve B2KL

For controllers with constant output (0…10 V) or switching output (2-/3-point control)

Assembly with ball valve without the use of tools

Stepping motor with SAUTER Universal Technology (SUT) electronic control unit

Electronic force-dependent motor cut-off

Automatic recognition of applied control signal (continuous or switched)

Coding switch for selection of characteristic and running time (35 s, 60 s, 120 s)

Type of characteristic (linear/quadratic/equal-percentage) can be set on the actuator

Direction of operation can be selected directly on the cable

Maintenance-free gear unit

Gear unit can be disengaged in order to position the ball valve manually (using the lever)

Bracket and bayonet ring made of glass-fibre-reinforced plastic for fitting onto ball valve

AKM 105S, 115S: Rotary actuator with SAUTER Universal

Technology (SUT) for ball valve

How energy efficiency is improved

Automatic adaptation to ball valve, precise activation and high energy efficiency with minimal operat

ing noise.

Features

• For operating 2- and 3-way ball valves VKR, VKRA, BKR, BKRA, VKAI, VKAA, BKLI, BKTI, BKTA,

(AKM115S) and 6-way ball valve B2KL

• For controllers with constant output (0…10 V) or switching output (2-/3-point control)

• Assembly with ball valve without the use of tools

• Stepping motor with SAUTER Universal Technology (SUT) electronic control unit

• Electronic force-dependent motor cut-off

• Automatic recognition of applied control signal (continuous or switched)

• Coding switch for selection of characteristic and running time (35 s, 60 s, 120 s)

• Type of characteristic (linear/quadratic/equal-percentage) can be set on the actuator

• Direction of operation can be selected directly on the cable

•Maintenance-free gear unit

• Gear unit can be disengaged in order to position the ball valve manually (using the lever)

• Bracket and bayonet ring made of glass-fibre-reinforced plastic for fitting onto ball valve

Technical data

Power supply

Power supply 24 V~ ±20%, 50…60 Hz

Power supply 24 V=-10%…20%

Power consumption 4.9 W/8.7 VA

Parameters

Running time1) 35/60/120 s

Angle of rotation 90°

Response time 200 ms

Power cable 1.2 m, 5 × 0.5 mm2

Positioner Positioning signal y 0…10 V, Ri > 100 kΩ

Positional feedback signal 0…10 V; load > 10 kΩ

Starting point U0 0 V or 10 V

Control span ΔU 10 V

Switching range Xsh 200 mV

Ambient conditions

Temperature of medium2) Max. 100 °C

Admissible ambient temperature–10…55 °C

Admissible ambient humidity 5…95% rh, no condensation

Construction

Fitting Vertically upright to horizontal,

not upside down

Weight 0.7 kg

Housing Lower section black, upper section

yellow

Housing material Fire-retardant plastic

Standards and directives

Type of protection IP54 as per EN 60529

Protection class III as per IEC 60730

CE conformity according to EMC Directive 2014/30/EU EN 61000-6-1. EN 61000-6-3

EN 61000-6-4

Directive 2006/95/EC Machine directive (EN 1050)