Phoenix Contact PTS 1,5/ 4-PH-5,0 CLIP-B – PCB connector 1751973

The QUINT DC-DC converter 24 V/10 A converts the DC voltage from

18 V … 32 V to an adjustable, controlled and galvanically separated 24 V

output voltage. If no regulated and stable 24 V DC voltage is available to

supply a load, DC-DC converters ensure the adjustment of the 24 V load:

A non-regulated DC voltage is converted to an adjustable output voltage

of 22.5 V …28.5 V.

Due to electrical isolation, the DC voltage circuits are electrically isolated

from each other in a safe way. With a design width of only 80 mm, the

housing is extremely slim. The floating DC-OK output and an LED are

available for signaling.

The 6.2 mm wide MINI MCR-SL-RPS-I-I… repeater power supply supplies

transmitters in the field and electrically isolates the input signal from the

output signal. The module can be used in both isolator and repeater power

supply operation.

Electrically isolated 0…20 mA or 4…20 mA analog standard signals are

available on the input and output side.

The power supply (19.2 V DC to 30 V DC) can be supplied via connection

terminal blocks on the modules or in conjunction with the DIN rail connector.

Your advantages

• Power supply possible via the foot element (TBUS)

• Can be used as an isolator with passive input

• Highly-compact repeater power supplies for electrical isolation, amplification,

and filtering of standard analog signals

• 3-way isolation

• Supply of 2-conductor and passive 3-conductor sensors

Key Features

• Ethernet ports- EAGLE40-03: 3x GbE ports, up to 1

Gbps throughput- EAGLE40-07: 7x GbE ports, up to 5

Gbps throughput

• HiSecOS with SPI and DPI capabilities

• Firewall Learning Mode for rule configuration

• IPSec VPN for secure data encryption

• Dynamic-routing support with OSPF and router redundancy

VRRP

• Graphical HTML 5 web user interface

• Operating temperature range of  -40°C to +70°C

• Convection-cooled metal housing

• EAGLE40-03: Meets process automation standards: ISA-12.12.-01

Class 1 Div. 2 – Haz. Loc, ATEX-95 Category 3G (Zone 2)

• EAGLE40-07: Meets Energy standards: Substation IEC 61850-3

and IEEE 1613

• Assists with cybersecurity regulations: NERC CIP, IEC 62443.

NIST

• Flexible management and monitoring: Industrial HiVision,

Tripwire Enterprise, Tripwire Log Center

• Hardware for further DPI modules, advanced intrusion and anomaly

detection capabilities