SHINKAWA VM-25S01 CONDITION MONITORING SYSTEM
VM-25 DEVICE CONFIG
(Configuration software for VM-25 condition
monitoring system) Page 1 of 1
VM-25
MONITORING SYSTEM
Setup*1
*1 A PC is required. Setup option includes initial setup of the PC, installation of the software and PC address setting.
SYSTEM REQUIREMENTS
HARDWARE REQUIREMENTS
PC/AT compatible personal computer
Processor 1GHz or higher recommended
Memory 1GByte or higher recommended
Display 1280 x 768 or higher –resolution is recommended
Hard disk drive 1GByte of available hard-disk space
Drive DVD-ROM drive
Network Ethernet 100BASE-TX
SOFTWARE REQUIREMENTS
Category Model Edition Version
OS Microsoft® Windows® 7 (32/64bit) Professional
or higher
Any
Microsoft® Windows® 8.1(32/64bit) Pro or higher Any
Microsoft® Windows® 10 (32/64bit) Pro or higher Any
Others Microsoft® .NET Framework – 4.0
CONNECTION
Supported devices : VM-25 Monitor
Number of simultaneous connections : 1device*3
*3 Connected device can be changed by altering the IP address, if the connection is made
via Ethernet.
COMMUNICATION(Ethernet)
Network : Ethernet 100Base-TX
Protocol : TCP/IP
SCREEN
Screen display language : English
DEVICE CONFIGURATION MANAGEMENT
Configuration change : Change monitor type (displacement vibration,
velocity vibration or acceleration
vibraton)
Paramter change : Parameter setting of vibration measurement
(Measurement, Alarm), Recorder output, Relay,
Parameter setting such as communication
Adjustment : Gap/Bias voltage value, measurement value, etc
Others : Channel disablement,
Time setting, Simulated value setting,
Modbus communication setting
(Data copy setting, scaling setting)
DISPLAY FUNCTION
MEASUREMENT VALUES
Gap/Bias Voltage Indications, Digital indication of measurement values,
Peak measurement values
ALARM STATUS
DANGER alarm, ALERT alarm, OK alarm
OTHER DISPLAY
Time etc.
CONTROL FUNCTIONS
ALARM CONTROL : Alarm reset, Peak-hold reset
BYPASS CONTROL : DANGER bypass, Channel bypass
LED CONTROL : All LEDs on/off
OTHER FUNCTIONS
Password protection : Password authentication on start-up, write
configuration to the device and adjust the device.
Firmware update : Update a firmware of VM-25.
Device setting file output : Output a configuration of VM-25 setting as text file
SOFTWARE DISTRIBUTION MEDIA
Media : DVD-ROM
SYSTEM CONFIGURATION
Example of Screen
※Actual screens may differ from the images shown in this document