B&R X20cPS9400 Supply for the bus controller

With the X20c series, B&R is setting new standards for protection against harsh environmental conditions.

This variant of the modular X20 distributed controller and I/O product line is protected against condensation and corrosive gases by a coating on the electronics module.

The modules are suitable for use even in adverse atmospheric conditions.

The coating on the electronics module protects the components and circuit board from the effects of condensation and corrosive gases.

The effectiveness of protection against condensation is checked using the test specified in BMW GS 95011-4. and protection against corrosive gases using the 4-part corrosive gas tests specified in EN 60068-2-60. test method 4.

The tests are completed both in the company testing lab, which is accredited in accordance with EN ISO/IEC 17025:2007. and at certified external testing facilities. There, the products undergo further testing to check their durability – even beyond standard requirements.

Bus module for 240 VAC I/O modules

The internal I/O supply is interconnected

240 V coding for bus module, electronic module and terminal block

These modules are even suitable for use in adverse atmospheric conditions.

The coating on the electronics module protects the components and circuit

board from the effects of condensation and corrosive gases. The effectiveness

of protection against condensation is checked using the test specified in BMW

GS 95011-4. and protection against corrosive gases using the 4-part corrosive

gas tests specified in EN 60068-2-60. test method 4. The tests are completed

both in the company testing lab, which is accredited in accordance with EN

ISO/IEC 17025:2007. and at certified external testing facilities.

There, the products undergo further testing to check their durability – even

beyond standard requirements.

The X20 Compact-S series of controllers is available in different versions.

In this way, the customer gets the product that best meets the requirements

of the machine both technically and economically.

The processor performance of the compact controllers ranges from 166 MHz (compatible) to 667 MHz.

The most economical models are equipped with 128 MB RAM, 8 kB non-volatile RAM and a 256 MB flash drive.

The most powerful Compact-S controllers have cycle times as low as 400 µs.

512 MB of RAM, 64 kB of non-volatile RAM, and a 256 MB Flash drive.

RAM, 64 kB non-volatile RAM, and a 2 GB internal flash drive.

The controller offers a wide range of communication options via POWERLINK,

Ethernet, USB and RS232. Optional RS485 or CAN interfaces are also available.

If an application requires additional interfaces,

the controller can be modularly expanded with 1 or 2 X20 interface slots.

This allows the use of the entire X20 fieldbus interface product range.