B&R X20cHB2880 Hub expansion module

POWERLINK bus controller X20BC8083. standalone hub X20HB8880 and the POWERLINK TCP/IP gateway

X20HB8815 are equipped with a modular hub extension. 1 or 2 additional slots are available depending on

the bus base. The X20HB2880 hub expansion module can be operated in these slots.

The status of the module and network are indicated by LEDs.

• Hub expansion module

• 2x hub 100 BASE-TX

POWERLINK bus controllers X20BC8083 and X20BC8084 (starting with revision D0) and standalone hub

X20HB8880 are equipped with a modular hub extension. 1 or 2 additional slots are available depending on

the bus base. The X20HB1881 hub expansion module can be operated in these slots. It is important to note

that the hardware revision of the X20BC8083 and X20HB8880 must be ≥F0.

The hub expansion module is a 1x hub. The Ethernet connection is made using 62.5/125 μm or 50/125 µm

fiber optic multimode cable with a duplex LC connection. The module and network status is indicated using

LEDs.

• Hub expansion module

• 1x hub 100 BASE-FX

• Fiber optic multimode cable

• Range up to 2 km

• Hot-swap-capable

The X20 Compact-S series of controllers is available in different versions.

In this way, the customer gets the product that best meets the requirements

of the machine both technically and economically.

The controller offers a wide range of communication options via POWERLINK,

Ethernet, USB and RS232. Optional RS485 or CAN interfaces are also available.

If an application requires additional interfaces,