Honeywell 51401635-150  COMM CONTROL

Honeywell 51401635-150  COMM CONTROL

BRIGHTNESS CONTROL BUTTONS–

Press to adjust the picture brightness.

When you press the BRIGHTNESS CONTROL BUTTONS at the

same time for over three seconds, you will hear a beep and the

adjusted brightness will be canceled and set back to the factory setting

“center.”

CONTRAST CONTROL BUTTONS–

Press to adjust the picture contrast.

You will hear short beeps when the contrast reaches its maximum

setting.

TONE CONTROL BUTTONS (RED/BLUE)

RED

BLUE—-

Use to adjust the white tone as you prefer, other than WB1/WB2 selectable by the

WHITE SELECT BUTTON.

When the + button is kept pressed, the color tone becomes vivid

gradually.  When the – button is kept pressed, it fades gradually.

The user adjusted tone is automatically stored.  It is recalled and

readjustable by pressing either one of the TONE CONTROL

BUTTONS once when using WB1/WB2.

You will hear a beep and the user adjusted tone will be canceled and

set back to the factory setting “WB1” when you press the WHITE

SELECT BUTTON for over three seconds.

WHITE SELECT BUTTON (WB1/WB2)

1 2- Use to select white balance either WB1 (9300˚K: bluish white) or WB2 (6500˚K:

reddish white).-

51401635-150

WB-

Pressing the button alternates between the white balances and the

indicator will be illuminated in either case.

Neither indicator blinks when the user adjusted/adjustable tone is

selected by pressing either one of the TONE CONTROL BUTTONS

once.

SIGNAL SELECT BUTTON (BNC/D-SUB)

BNC D-SUB- Use to select the input signal either from the BNC CONNECTORS or from the 15PIN

D-SUB CONNECTOR.-

SIGNAL

Pressing the button alternates between the input connectors and the

indicator will be illuminated in either case.