Honeywell TDC‑3000 SOE DI IOP,51402625-175 MC‑PDIS12
TDC‑3000 SOE DI IOP,51402625‑175 MC‑PDIS12
on by the Enhanced Micro TDC3000 system—data and programs may be lost.
1.5 EMC DIRECTIVE
The Enhanced Micro TDC3000 system is being brought into compliance with European
guidelines for ElectroMagnetic Compatibility (EMC). The European EMC directive
(89/366/EEC) requires that an electronics product operate reliably in its intended EMC
environment. It also requires that the product not detrimentally affect other products
operating in their own environment.
Eventually the Enhanced Micro TDC3000 hardware will display a product certification
label to indicate the hardware is in compliance. This label is placed inside, at the bottom
front of the tower. As shown in Figure 1-5. a “CE” logo on the product label indicates the
product is in compliance with the European EMC directive along with other descriptive
information about the product
The following publications apply to the Enhanced Micro TDC3000 system and should be
referred to as required and available:
Title
8 Node Enhanced Micro TDC3000 Specification and
Technical Data
8 Node Enhanced Micro TDC3000 User’s Manual [this
pub]
8 Node Multinode Module Service
History Module Service
System Maintenance Guide
Test System Executive
Hardware Verification Test System
Core Module Test System
Maintenance Test Operations
Process Operations Manual
Universal Control Network Planning
Universal Control Network Installation
Universal Control Network Guidelines
Universal Control Network Specification
and Technical Data
51402625-175
PM and APM Planning
Process Manager/Advanced Process Manager
Installation
Process Manager/Advanced Process Manager
Implementation Guidelines
Process Manager/Advanced Process Manager
Checkout
Binder
System Summary – 2
Implementation/8-Node Enhanced Micro
TDC3000
Implementation/8-Node Enhanced Micro
TDC3000
LCN Service – 2
LCN Service – 1
LCN Service – 3
LCN Service – 3
LCN Service – 3
LCN Service – 1
Operation/Process Operations
System Site Planning – 1
Installation/Universal Control Network
Installation/Universal Control Network
System Summary – 2
System Site Planning – 1
Implementation/PM/APM
Implementation/Advanced Process
Manager – 1
Implementation/PM/APM
Process Manager/Advanced Process Manager Service PM/APM/HPM Service -1
Process Manager Module Test System (PMMTS)
PM/APM/HPM Service -2
Process Manager Test System (PMTS)
Process Manager Test Executive (PMEX)
PM/APM/HPM Service -2
PM/APM/HPM Service -2