EATON FP-4000 FP4201-00 / 66D2120G41 Feeder Protection

Table 3. Technical Specifications

CPU AC1101

Memory 1024k  8 Static DRAM

1024k  8 Flash ROM

LAN Controller AC1102

Network Connection 10/100BaseT RJ-45 network connector (ConnectUPS-X provides 3 additional

connectors for your devices)

UPS Protocol Eaton UPS communication protocol

Network Protocol HTTP over TCP/IP

SNMP over UDP/IP

SMTP, ARP, RARP, and TFTP

BOOTP, DHCP

Supported MIB Eaton PowerMIB (XUPS.MIB)

RFC-1628 Standard UPS (STDUPSV1.MIB)

OS Supported for Shutdown Microsoft Windows

Novell NetWare

Linux

UNIX

Mac OS X

Operating Temperature 0–40°C (32–104°F)

Operating Humidity 10–80%, noncondensing

Power Input 9 Vdc unregulated

ConnectUPS-E requires 12 Vdc

Power Consumption 3.5 watts maximum

Size (L x W x H) ConnectUPS-X:  12 cm x 11.4 cm x 3.9 cm (4.7” x 4.5” x 1.5”)

ConnectUPS-BD:  13.4 cm x 8.1 cm x 3.3 cm (5.3” x 3.2” x 1.3”)

ConnectUPS-E:  13.4 cm x 9 cm x 3 cm (5.3” x 3.5” x 1.2”)

Weight 200 gm (7 oz)

EMC Statements Class B:  FCC Part 15. ICES-003. CE

DIP Switch Description

DIP switch definitions for the ConnectUPS Web/SNMP Cards are listed

in Table 4.

Table 4. DIP Switch Modes

SW1

SW2

Description

Off

Off

Operational Mode (default)

Off

On

BOOTP/DHCP Enable Mode (overrides the serial/Telnet

configuration)

On

Off

Reserved

On

On

Reserved

Jumper 1 Settings

Jumper 1 (JP1) is found on all three models (ConnectUPS-X,

ConnectUPS-BD, and ConnectUPS-E). The JP1 pins are NOT jumpered

by factory default. Table 5 shows the jumper definitions.

Table 5. JP1 Definitions

Jumper Setting

Definition

1 and 2

Allows admin to be entered as the password when the

programmed Superuser password has been forgotten

3 and 4

Disables all changes to the card’s configuration

NOTE  On the ConnectUPS-BD, jumper positions 5 and 6. 7 and 8 are undefined; DO NOT

jumper these positions