HITACHI LPU100A CPU Module
Additional benefits:
• Cost-efficient solution with a comprehensive feature set ideal for the first mile and access applications
• Stepwise introduction of Ethernet/MPLS-TP based applications in operational networks
• Secured data traffic in packet-switched networks
• Reliable data transport under any network circumstance
• Time and phase synchronization through the WAN
• Utility-grade design with fanless operation for deployment in harsh environments
• Fully interoperable with FOX family
Features
• Full support for native Ethernet and MPLS-TP
• Full synchronization solution according to IEEE1588v2 / SyncE
• Different types of clock in/out
• Complete circuit emulation solutions based on SAToP
• L2 based secured transmission on at least two trunk lines (authentication & full/partial encryption)
• MTBF > 20 years
• High-temperature temperature
• Flexible connectivity:
8x GBE ports (4 el. + 4 SFP & 4 el. wherefrom two with PoE highly desirable (2x 15W))
4x E1 ports
4x 64 kbit/s
4x RS-232 / RS485
ToD, BITS, 1 PPS, 1.5/2/10MHz Sync Interfaces
Alarm and management interfaces
• Redundant power supply (-48VDC)
• Combination of MPLS-TP (network side) and traditional interfaces (user side) in one device
The fully redundant network element supports all SDH-traffic protection schemes
including 2/4-fibre MS-Spring. All optical ports are XFP / SFP based.
Fully integrated and managed boosters / preamplifiers / equalizers enable highly
flexible and reliable long-haul connections, without the need for additional external
devices. The robust mechanical and EMC-design including the distributed power
supply concept of FOX515H are optimized to cope with harsh environments which
are typical for utility applications. The mechanical, electrical and EMC / safety
performance of FOX515H is fully type-tested by an independent, certified Swiss
Test-lab. Most interfaces are provided with multirate SFP/XFP cages enabling each
individual port to have a different configuration with a wide variety of optical
wave-lengths for WDM, connectors and available ranges.
capacity for data transmission with a lower focus upon the quality of service.
T-VERTER N2-405-M3
SIEMENS 6AV3637-1LL00-0AX1 P.100 STN
Siemens Sinamics G120CPN 6SL3210-1KE11-8AF1
SEW EURODRIVE MDX60A0075-5A3-4-00
Control Techniques Commander C300-01200042 A 0.75kW
ALLEN-BRADLEY 2094-BM02
PARKER PVD-C3412
BAUMULLER NURNBERG BUS21-30/60-31-020
Schneider Electric TSXP5720 with Module TSXFPP20
MITSUBISHI HF-SP52 SERVO MOTOR
BANNER IVUTBPW08
Cognex KCC-REM-CGX-DM500
Telemecanique Square D ATV18U29M2 AC Speed Drive 2HP/1.5kW 200-240V
HANNA INSTRUMENTS HI97702C
ABB ACS150-03E-05A6-4
National instruments NI9215
Siemens PAC3120 7KM3120-1BA01-1EA0
PROMINENT GALA1602PVT200UA014000
MOSKA ELEKTRONIK SP1024
Bodet Micro Quartz Delta II
B&R Power Supply PS477 3PS477.9 Rev.C0
Siemens C7-633 A5E00060957 C79039-A8000-Z032-02-SA for 6ES7633-1DF02-0AE3
DANFOSS FC-302PK75T5E20H1 131U4964
Wittenstein Alpha CP060-M02-20-111-000
LENZE E82EV152_2C000 13142269 version:4A37 WITH module E82ZAFSC
Mitsubishi FR-A540-3.7K-EC
SEW EURODRIVE 08238960 UFP11A-00 PROFIBUS DP-V1
Baumer Electric SCATEC-2 FLDK 110C1002/S42 Laser Sample Counter
PR1614 Philips PR1614/00 Control Panel
Siemens 5WG1 567-1AB22 GAMMA instabus 5WG1567-1AB22
SIEMENS C79040-A6430-C209-02-85
EWON FLEXY20500_00MA/S WHIT MODULE FLB3202
B&R 5PC600.SX01-00
Teleprotection systems, in contrast, have always operated under the pressure of protecting
critical infrastructure. Reliability and quality of service is paramount, resilience is required,
while new technologies and techniques must prove themselves robust enough to match,
or exceed, the existing equipment before they can safely be used in the electrical network.
The fully redundant network element supports all SDH-traffic protection schemes
including 2/4-fibre MS-Spring. All optical ports are XFP / SFP based.
Fully integrated and managed boosters / preamplifiers / equalizers enable highly
flexible and reliable long-haul connections, without the need for additional external
devices. The robust mechanical and EMC-design including the distributed power
supply concept of FOX515H are optimized to cope with harsh environments which
are typical for utility applications. The mechanical, electrical and EMC / safety
performance of FOX515H is fully type-tested by an independent, certified Swiss
Test-lab. Most interfaces are provided with multirate SFP/XFP cages enabling each
individual port to have a different configuration with a wide variety of optical