MOOG D138-001-001 Industrial Control Module

The G123-814-001 has a closed loop configuration and is used with Hydrolux WP series proportional valves.

Important specifications considered include 24V @ 800mA coil and 12% spool overlap.

Output current is 25% higher than rated to ensure that maximum flow is

not unduly affected by valve production tolerances and spool Bernoulli forces.

Deadband compensation circuitry to eliminate spool overlap has been optimised

for flow bench and field applications. Deadband compensation is not user adjustable.

Applying this amplifier Apply this amplifier to other valves with the same specifications to obtain the same performance as Hydrolux valves.

The G12-814 is not suitable for conventional open-loop proportional valve applications.

A zero flow condition is highly unlikely as the deadband compensation circuit cancels out spool overlap.

Zero flow conditions are unlikely with zero coil current as the deadband compensation circuit cancels out spool overlap.

The MSC III Motion Controller is a high performance Motion Controller with PLC functionality

that is ideal for complex centralized and decentralized applications.

The MSC III Motion Controller offers several fieldbus interfaces,

high resolution analog inputs/outputs, position sensor interfaces and digital inputs/outputs.

It is designed for fast and accurate closed-loop control of multiple hydraulic and electric actuators.

MASS (Moog Application Software Suite)

The IEC 61131-3 is an integrated development environment based on CODESYS 3.

MASS offers full programming, debugging, simulation, parameterization, visualization and tracing capabilities.

It helps you to achieve enhanced machine performance via special Moog