MOOG D138-003-010 Industrial Control Module

The G122-829A001 emits radiation well below the level called for in its CE mark test.

Therefore, no special precautions are required for suppression of emissions.

However, immunity from external interfering radiation is dependent on careful wiring techniques.

The accepted method is to use screened cables for all connections and to radially terminate the cable screens,

in an appropriate grounded cable gland, at the point of entry into the industrial steel enclosure.

If this is not possible, chassis ground screw terminals are provided on the G122-829A001.

Exposed wires should be kept to a minimum length.

Connect the screens at both ends of the cable to chassis ground.

Installation

PlacementA horizontal DIN rail, mounted on the vertical rear surface of an industrial steel enclosure,

is the intended method of mounting.

The rail release clip of the G122-829A001 should face down,

so the front panel and terminal identifications are readable and so the internal electronics receive a cooling airflow.

These Application Notes are a guide to applying the G122-829A001 P-I Servoamplifier.

These Application Notes can be used to:

 Determine the closed loop structure for your application.

 Select the G122-829A001 for your application. Refer also to data sheet G122-829.

 Use these Application Notes to determine your system configuration.

  Draw your wiring diagram.

 Install and commission your system.

Aspects, such as hydraulic design, actuator selection, feedback transducer selection,

performance estimation, etc. are not covered by these Application Notes.

The G122-202 Application Notes (part no C31015) cover some of these aspects.

Moog Application Engineers can provide more detailed assistance, if required.

GE Fanuc/ VMIC VMIVME-5532S VMEBus Fiber-Optic Repeater Link

VMIC VMIVME-7698 VME-7698-345  SINGLE BOARD COMPUTER

VMIC VMIPC4-7301 CPU Board

PCIE-5565PIORC -100000 VMIC5565 GE

VMIC VMIVME-7805  VME 7805 RC   VMIVME7805  VMIVME 7805. SKU36

GE VMIC XVB602 13200013  350-9300007867 -13200013 C W/ BVM 953-10420  PNC 1394

GE FANUC VMIC VMIVME-7750-74 0  VME-7750  VMIVME7750 VMIC 7750 SKUE2

VMIC/GE/Abaco VME7807RC?VMIV ME-7807 V7807 w/ Warranty!

602937-04 / PCB-VMIC SVG PROCESS ANALOG I-O VMIVME 4512 – 333-004512-000 G /VMIC

VMIC VMIVME 7751 76003    VMIVME7751   332-007751-000 C   350-027751-760 03 A

PCI-5565 VMIC5565 Front Reflection Memory Card Fast Delivery

VMIC VMIVME 4120 High-Performan ce VMEbus Circuit Module